From: Sean Paul <seanp...@chromium.org>

This patch adds ptn3460 as module_i2c_driver.

Signed-off-by: Sean Paul <seanpaul at chromium.org>
Signed-off-by: Ajay Kumar <ajaykumar.rs at samsung.com>
---
 .../devicetree/bindings/video/bridge/ptn3460.txt   |   27 ++
 drivers/gpu/drm/bridge/Kconfig                     |   10 +
 drivers/gpu/drm/bridge/Makefile                    |    2 +
 drivers/gpu/drm/bridge/ptn3460.c                   |  405 ++++++++++++++++++++
 4 files changed, 444 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/bridge/ptn3460.txt
 create mode 100644 drivers/gpu/drm/bridge/ptn3460.c

diff --git a/Documentation/devicetree/bindings/video/bridge/ptn3460.txt 
b/Documentation/devicetree/bindings/video/bridge/ptn3460.txt
new file mode 100644
index 0000000..03366c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/bridge/ptn3460.txt
@@ -0,0 +1,27 @@
+ptn3460 bridge bindings
+
+Required properties:
+       - compatible: "nxp,ptn3460"
+       - reg: i2c address of the bridge
+       - powerdown-gpios: OF device-tree gpio specification
+       - reset-gpios: OF device-tree gpio specification
+       - edid-emulation: The EDID emulation entry to use
+               +-------+------------+------------------+
+               | Value | Resolution | Description      |
+               |   0   |  1024x768  | NXP Generic      |
+               |   1   |  1920x1080 | NXP Generic      |
+               |   2   |  1920x1080 | NXP Generic      |
+               |   3   |  1600x900  | Samsung LTM200KT |
+               |   4   |  1920x1080 | Samsung LTM230HT |
+               |   5   |  1366x768  | NXP Generic      |
+               |   6   |  1600x900  | ChiMei M215HGE   |
+               +-------+------------+------------------+
+
+Example:
+       lvds-bridge at 20 {
+               compatible = "nxp,ptn3460";
+               reg = <0x20>;
+               powerdown-gpios = <&gpy2 5 1 0 0>;
+               reset-gpios = <&gpx1 5 1 0 0>;
+               edid-emulation = <5>;
+       };
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 1e2f96c..0b12d16 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -6,4 +6,14 @@ config DRM_BRIDGE

 menu "bridge chips"
        depends on DRM_BRIDGE
+
+config DRM_PTN3460
+       tristate "NXP ptn3460 eDP/LVDS bridge"
+       depends on DRM && DRM_BRIDGE
+       depends on OF
+       depends on I2C
+       select DRM_PANEL
+       help
+         ptn3460 eDP-LVDS bridge chip driver.
+
 endmenu
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index be16eca..b4733e1 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -1 +1,3 @@
 ccflags-y := -Iinclude/drm
+
+obj-$(CONFIG_DRM_PTN3460) += ptn3460.o
diff --git a/drivers/gpu/drm/bridge/ptn3460.c b/drivers/gpu/drm/bridge/ptn3460.c
new file mode 100644
index 0000000..f41302a
--- /dev/null
+++ b/drivers/gpu/drm/bridge/ptn3460.c
@@ -0,0 +1,405 @@
+/*
+ * NXP PTN3460 DP/LVDS bridge driver
+ *
+ * Copyright (C) 2013 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <drm/drm_panel.h>
+
+#include "drmP.h"
+#include "drm_edid.h"
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+
+#define PTN3460_EDID_ADDR                      0x0
+#define PTN3460_EDID_EMULATION_ADDR            0x84
+#define PTN3460_EDID_ENABLE_EMULATION          0
+#define PTN3460_EDID_EMULATION_SELECTION       1
+#define PTN3460_EDID_SRAM_LOAD_ADDR            0x85
+
+struct ptn3460_bridge {
+       struct drm_connector connector;
+       struct i2c_client *client;
+       struct drm_bridge *bridge;
+       struct drm_panel *panel;
+       struct edid *edid;
+       struct gpio_desc *gpio_pd_n;
+       struct gpio_desc *gpio_rst_n;
+       u32 edid_emulation;
+       bool enabled;
+};
+
+static int ptn3460_read_bytes(struct ptn3460_bridge *ptn_bridge, char addr,
+               u8 *buf, int len)
+{
+       int ret;
+
+       ret = i2c_master_send(ptn_bridge->client, &addr, 1);
+       if (ret <= 0) {
+               DRM_ERROR("Failed to send i2c command, ret=%d\n", ret);
+               return ret;
+       }
+
+       ret = i2c_master_recv(ptn_bridge->client, buf, len);
+       if (ret <= 0) {
+               DRM_ERROR("Failed to recv i2c data, ret=%d\n", ret);
+               return ret;
+       }
+
+       return 0;
+}
+
+static int ptn3460_write_byte(struct ptn3460_bridge *ptn_bridge, char addr,
+               char val)
+{
+       int ret;
+       char buf[2];
+
+       buf[0] = addr;
+       buf[1] = val;
+
+       ret = i2c_master_send(ptn_bridge->client, buf, ARRAY_SIZE(buf));
+       if (ret <= 0) {
+               DRM_ERROR("Failed to send i2c command, ret=%d\n", ret);
+               return ret;
+       }
+
+       return 0;
+}
+
+static int ptn3460_select_edid(struct ptn3460_bridge *ptn_bridge)
+{
+       int ret;
+       char val;
+
+       /* Load the selected edid into SRAM (accessed at PTN3460_EDID_ADDR) */
+       ret = ptn3460_write_byte(ptn_bridge, PTN3460_EDID_SRAM_LOAD_ADDR,
+                       ptn_bridge->edid_emulation);
+       if (ret) {
+               DRM_ERROR("Failed to transfer edid to sram, ret=%d\n", ret);
+               return ret;
+       }
+
+       /* Enable EDID emulation and select the desired EDID */
+       val = 1 << PTN3460_EDID_ENABLE_EMULATION |
+               ptn_bridge->edid_emulation << PTN3460_EDID_EMULATION_SELECTION;
+
+       ret = ptn3460_write_byte(ptn_bridge, PTN3460_EDID_EMULATION_ADDR, val);
+       if (ret) {
+               DRM_ERROR("Failed to write edid value, ret=%d\n", ret);
+               return ret;
+       }
+
+       return 0;
+}
+
+static void ptn3460_pre_enable(struct drm_bridge *bridge)
+{
+       struct ptn3460_bridge *ptn_bridge = bridge->driver_private;
+       int ret;
+
+       if (ptn_bridge->enabled)
+               return;
+
+       gpiod_set_value(ptn_bridge->gpio_pd_n, 1);
+
+       gpiod_set_value(ptn_bridge->gpio_rst_n, 0);
+       udelay(10);
+       gpiod_set_value(ptn_bridge->gpio_rst_n, 1);
+
+       drm_panel_prepare(ptn_bridge->panel);
+
+       /*
+        * There's a bug in the PTN chip where it falsely asserts hotplug before
+        * it is fully functional. We're forced to wait for the maximum start up
+        * time specified in the chip's datasheet to make sure we're really up.
+        */
+       msleep(90);
+
+       ret = ptn3460_select_edid(ptn_bridge);
+       if (ret)
+               DRM_ERROR("Select edid failed ret=%d\n", ret);
+
+       ptn_bridge->enabled = true;
+}
+
+static void ptn3460_enable(struct drm_bridge *bridge)
+{
+       struct ptn3460_bridge *ptn_bridge = bridge->driver_private;
+
+       drm_panel_enable(ptn_bridge->panel);
+}
+
+static void ptn3460_disable(struct drm_bridge *bridge)
+{
+       struct ptn3460_bridge *ptn_bridge = bridge->driver_private;
+
+       if (!ptn_bridge->enabled)
+               return;
+
+       ptn_bridge->enabled = false;
+
+       drm_panel_disable(ptn_bridge->panel);
+
+       gpiod_set_value(ptn_bridge->gpio_rst_n, 1);
+       gpiod_set_value(ptn_bridge->gpio_pd_n, 0);
+}
+
+static void ptn3460_post_disable(struct drm_bridge *bridge)
+{
+       struct ptn3460_bridge *ptn_bridge = bridge->driver_private;
+
+       drm_panel_unprepare(ptn_bridge->panel);
+}
+
+void ptn3460_bridge_destroy(struct drm_bridge *bridge)
+{
+       drm_bridge_cleanup(bridge);
+}
+
+int ptn3460_get_modes(struct drm_connector *connector)
+{
+       struct ptn3460_bridge *ptn_bridge;
+       u8 *edid;
+       int ret, num_modes;
+       bool power_off;
+
+       ptn_bridge = container_of(connector, struct ptn3460_bridge, connector);
+
+       if (ptn_bridge->edid)
+               return drm_add_edid_modes(connector, ptn_bridge->edid);
+
+       power_off = !ptn_bridge->enabled;
+       ptn3460_pre_enable(ptn_bridge->bridge);
+
+       edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
+       if (!edid) {
+               DRM_ERROR("Failed to allocate edid\n");
+               return 0;
+       }
+
+       ret = ptn3460_read_bytes(ptn_bridge, PTN3460_EDID_ADDR, edid,
+                       EDID_LENGTH);
+       if (ret) {
+               kfree(edid);
+               num_modes = 0;
+               goto out;
+       }
+
+       ptn_bridge->edid = (struct edid *)edid;
+       drm_mode_connector_update_edid_property(connector, ptn_bridge->edid);
+
+       num_modes = drm_add_edid_modes(connector, ptn_bridge->edid);
+
+out:
+       if (power_off)
+               ptn3460_disable(ptn_bridge->bridge);
+
+       return num_modes;
+}
+
+struct drm_encoder *ptn3460_best_encoder(struct drm_connector *connector)
+{
+       struct ptn3460_bridge *ptn_bridge;
+
+       ptn_bridge = container_of(connector, struct ptn3460_bridge, connector);
+
+       return ptn_bridge->bridge->encoder;
+}
+
+struct drm_connector_helper_funcs ptn3460_connector_helper_funcs = {
+       .get_modes = ptn3460_get_modes,
+       .best_encoder = ptn3460_best_encoder,
+};
+
+enum drm_connector_status ptn3460_detect(struct drm_connector *connector,
+               bool force)
+{
+       return connector_status_connected;
+}
+
+void ptn3460_connector_destroy(struct drm_connector *connector)
+{
+       drm_connector_cleanup(connector);
+}
+
+struct drm_connector_funcs ptn3460_connector_funcs = {
+       .dpms = drm_helper_connector_dpms,
+       .fill_modes = drm_helper_probe_single_connector_modes,
+       .detect = ptn3460_detect,
+       .destroy = ptn3460_connector_destroy,
+};
+
+int ptn3460_post_encoder_init(struct drm_bridge *bridge)
+{
+       struct ptn3460_bridge *ptn_bridge = bridge->driver_private;
+       int ret;
+
+       /* bridge is attached to encoder.
+        * safe to remove it from the bridge_lookup table.
+        */
+       drm_bridge_remove_from_lookup(bridge);
+
+       ret = drm_bridge_init(bridge->drm_dev, bridge);
+       if (ret) {
+               DRM_ERROR("Failed to initialize bridge with drm\n");
+               return ret;
+       }
+
+       /* connector implementation */
+       ptn_bridge->connector.polled = bridge->connector_polled;
+
+       ret = drm_connector_init(bridge->drm_dev, &ptn_bridge->connector,
+                       &ptn3460_connector_funcs, DRM_MODE_CONNECTOR_LVDS);
+       if (ret) {
+               DRM_ERROR("Failed to initialize connector with drm\n");
+               return ret;
+       }
+       drm_connector_helper_add(&ptn_bridge->connector,
+                                       &ptn3460_connector_helper_funcs);
+       drm_connector_register(&ptn_bridge->connector);
+       drm_mode_connector_attach_encoder(&ptn_bridge->connector,
+                                                       bridge->encoder);
+
+       if (ptn_bridge->panel)
+               drm_panel_attach(ptn_bridge->panel, &ptn_bridge->connector);
+
+       return ret;
+}
+
+struct drm_bridge_funcs ptn3460_bridge_funcs = {
+       .post_encoder_init = ptn3460_post_encoder_init,
+       .pre_enable = ptn3460_pre_enable,
+       .enable = ptn3460_enable,
+       .disable = ptn3460_disable,
+       .post_disable = ptn3460_post_disable,
+       .destroy = ptn3460_bridge_destroy,
+};
+
+static int ptn3460_probe(struct i2c_client *client,
+                               const struct i2c_device_id *id)
+{
+       struct device *dev = &(client->dev);
+       struct device_node *panel_node;
+       struct drm_bridge *bridge;
+       struct ptn3460_bridge *ptn_bridge;
+       int ret;
+
+       bridge = devm_kzalloc(dev, sizeof(*bridge), GFP_KERNEL);
+       if (!bridge) {
+               DRM_ERROR("Failed to allocate drm bridge\n");
+               return -ENOMEM;
+       }
+
+       ptn_bridge = devm_kzalloc(dev, sizeof(*ptn_bridge), GFP_KERNEL);
+       if (!ptn_bridge) {
+               DRM_ERROR("Failed to allocate ptn bridge\n");
+               return -ENOMEM;
+       }
+
+       panel_node = of_parse_phandle(dev->of_node, "panel", 0);
+       if (panel_node) {
+               ptn_bridge->panel = of_drm_find_panel(panel_node);
+               of_node_put(panel_node);
+               if (!ptn_bridge->panel)
+                       return -EPROBE_DEFER;
+       }
+
+       bridge->dev = dev;
+       bridge->driver_private = ptn_bridge;
+       bridge->funcs = &ptn3460_bridge_funcs;
+
+       ptn_bridge->client = client;
+       ptn_bridge->bridge = bridge;
+
+       ptn_bridge->gpio_pd_n = devm_gpiod_get(&client->dev, "powerdown");
+       if (IS_ERR(ptn_bridge->gpio_pd_n)) {
+               ret = PTR_ERR(ptn_bridge->gpio_pd_n);
+               DRM_ERROR("cannot get gpio_pd_n %d\n", ret);
+               return ret;
+       } else {
+               ret = gpiod_direction_output(ptn_bridge->gpio_pd_n, 1);
+               if (ret) {
+                       DRM_ERROR("cannot configure gpio_pd_n\n");
+                       return ret;
+               }
+       }
+
+       ptn_bridge->gpio_rst_n = devm_gpiod_get(&client->dev, "reset");
+       if (IS_ERR(ptn_bridge->gpio_rst_n)) {
+               ret = PTR_ERR(ptn_bridge->gpio_rst_n);
+               DRM_ERROR("cannot get gpio_rst_n %d\n", ret);
+               return ret;
+       } else {
+               /*
+                * Request the reset pin low to avoid the bridge being
+                * initialized prematurely
+                */
+               ret = gpiod_direction_output(ptn_bridge->gpio_rst_n, 0);
+               if (ret) {
+                       DRM_ERROR("cannot configure gpio_pd_n\n");
+                       return ret;
+               }
+       }
+
+       ret = of_property_read_u32(dev->of_node, "edid-emulation",
+                       &ptn_bridge->edid_emulation);
+       if (ret) {
+               DRM_ERROR("Can't read edid emulation value\n");
+               return -ENODEV;
+       }
+
+       i2c_set_clientdata(client, ptn_bridge);
+
+       drm_bridge_add_for_lookup(bridge);
+
+       return 0;
+}
+
+static int ptn3460_remove(struct i2c_client *client)
+{
+       return 0;
+}
+
+static const struct i2c_device_id ptn3460_i2c_table[] = {
+       {"nxp,ptn3460", 0},
+       {},
+};
+MODULE_DEVICE_TABLE(i2c, ptn3460_i2c_table);
+
+static const struct of_device_id ptn3460_match[] = {
+       { .compatible = "nxp,ptn3460" },
+       {},
+};
+MODULE_DEVICE_TABLE(of, ptn3460_match);
+
+struct i2c_driver ptn3460_driver = {
+       .id_table       = ptn3460_i2c_table,
+       .probe          = ptn3460_probe,
+       .remove         = ptn3460_remove,
+       .driver         = {
+               .name   = "nxp,ptn3460",
+               .owner  = THIS_MODULE,
+               .of_match_table = of_match_ptr(ptn3460_match),
+       },
+};
+module_i2c_driver(ptn3460_driver);
+
+MODULE_AUTHOR("Sean Paul <seanpaul at chromium.org>");
+MODULE_DESCRIPTION("NXP ptn3460 eDP-LVDS converter driver");
+MODULE_LICENSE("GPL");
-- 
1.7.9.5

Reply via email to