DCE5 and newer hardware only has 1 DAC. Use the correct
offset. This may fix display problems on certain board
configurations.
Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
Cc: stable at vger.kernel.org
---
drivers/gpu/drm/radeon/evergreen.c | 4 ++--
drivers/gpu/drm/radeon/si.c | 2 +-
drivers/gpu/drm/radeon/sid.h | 2 +-
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/radeon/evergreen.c
b/drivers/gpu/drm/radeon/evergreen.c
index 4116d02..f2b9e21 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -4348,8 +4348,8 @@ void evergreen_disable_interrupt_state(struct
radeon_device *rdev)
WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, 0);
}
- /* only one DAC on DCE6 */
- if (!ASIC_IS_DCE6(rdev))
+ /* only one DAC on DCE5 */
+ if (!ASIC_IS_DCE5(rdev))
WREG32(DACA_AUTODETECT_INT_CONTROL, 0);
WREG32(DACB_AUTODETECT_INT_CONTROL, 0);
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index e641725..09ec4f6 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -5682,7 +5682,7 @@ static void si_disable_interrupt_state(struct
radeon_device *rdev)
}
if (!ASIC_IS_NODCE(rdev)) {
- WREG32(DACA_AUTODETECT_INT_CONTROL, 0);
+ WREG32(DAC_AUTODETECT_INT_CONTROL, 0);
tmp = RREG32(DC_HPD1_INT_CONTROL) & DC_HPDx_INT_POLARITY;
WREG32(DC_HPD1_INT_CONTROL, tmp);
diff --git a/drivers/gpu/drm/radeon/sid.h b/drivers/gpu/drm/radeon/sid.h
index caa3e61..9239a6d 100644
--- a/drivers/gpu/drm/radeon/sid.h
+++ b/drivers/gpu/drm/radeon/sid.h
@@ -822,7 +822,7 @@
# define GRPH_PFLIP_INT_MASK (1 << 0)
# define GRPH_PFLIP_INT_TYPE (1 << 8)
-#define DACA_AUTODETECT_INT_CONTROL 0x66c8
+#define DAC_AUTODETECT_INT_CONTROL 0x67c8
#define DC_HPD1_INT_STATUS 0x601c
#define DC_HPD2_INT_STATUS 0x6028
--
1.8.3.1
