Jean-Francois Moine <moinejf at free.fr> wrote on Sun [2014-Jan-19 19:58:40 
+0100]:
> This patch uses always the adjusted video mode instead of a mix of
> original and adjusted mode.
> 
> Signed-off-by: Jean-Francois Moine <moinejf at free.fr>
> ---
>  drivers/gpu/drm/i2c/tda998x_drv.c | 66 
> +++++++++++++++++++--------------------
>  1 file changed, 33 insertions(+), 33 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c 
> b/drivers/gpu/drm/i2c/tda998x_drv.c
> index b688801..5d82301 100644
> --- a/drivers/gpu/drm/i2c/tda998x_drv.c
> +++ b/drivers/gpu/drm/i2c/tda998x_drv.c
> @@ -773,7 +773,7 @@ tda998x_encoder_mode_valid(struct drm_encoder *encoder,
>  static void
>  tda998x_encoder_mode_set(struct drm_encoder *encoder,
>                       struct drm_display_mode *mode,
> -                     struct drm_display_mode *adjusted_mode)
> +                     struct drm_display_mode *adj_mode)
>  {
>       struct tda998x_priv *priv = to_tda998x_priv(encoder);
>       uint16_t ref_pix, ref_line, n_pix, n_line;
> @@ -802,13 +802,13 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
>        * So we add +1 to all horizontal and vertical register values,
>        * plus an additional +3 for REFPIX as we are using RGB input only.
>        */
> -     n_pix        = mode->htotal;
> -     n_line       = mode->vtotal;
> +     n_pix        = adj_mode->htotal;
> +     n_line       = adj_mode->vtotal;
>  
> -     hs_pix_e     = mode->hsync_end - mode->hdisplay;
> -     hs_pix_s     = mode->hsync_start - mode->hdisplay;
> -     de_pix_e     = mode->htotal;
> -     de_pix_s     = mode->htotal - mode->hdisplay;
> +     hs_pix_e     = adj_mode->hsync_end - adj_mode->hdisplay;
> +     hs_pix_s     = adj_mode->hsync_start - adj_mode->hdisplay;
> +     de_pix_e     = adj_mode->htotal;
> +     de_pix_s     = adj_mode->htotal - adj_mode->hdisplay;
>       ref_pix      = 3 + hs_pix_s;
>  
>       /*
> @@ -816,37 +816,38 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
>        * those to adjust the position of the rising VS edge by adding
>        * HSKEW to ref_pix.
>        */
> -     if (adjusted_mode->flags & DRM_MODE_FLAG_HSKEW)
> -             ref_pix += adjusted_mode->hskew;
> +     if (adj_mode->flags & DRM_MODE_FLAG_HSKEW)
> +             ref_pix += adj_mode->hskew;
>  
> -     if ((mode->flags & DRM_MODE_FLAG_INTERLACE) == 0) {
> -             ref_line     = 1 + mode->vsync_start - mode->vdisplay;
> -             vwin1_line_s = mode->vtotal - mode->vdisplay - 1;
> -             vwin1_line_e = vwin1_line_s + mode->vdisplay;
> +     if ((adj_mode->flags & DRM_MODE_FLAG_INTERLACE) == 0) {
> +             ref_line     = 1 + adj_mode->vsync_start - adj_mode->vdisplay;
> +             vwin1_line_s = adj_mode->vtotal - adj_mode->vdisplay - 1;
> +             vwin1_line_e = vwin1_line_s + adj_mode->vdisplay;
>               vs1_pix_s    = vs1_pix_e = hs_pix_s;
> -             vs1_line_s   = mode->vsync_start - mode->vdisplay;
> +             vs1_line_s   = adj_mode->vsync_start - adj_mode->vdisplay;
>               vs1_line_e   = vs1_line_s +
> -                            mode->vsync_end - mode->vsync_start;
> +                            adj_mode->vsync_end - adj_mode->vsync_start;
>               vwin2_line_s = vwin2_line_e = 0;
>               vs2_pix_s    = vs2_pix_e  = 0;
>               vs2_line_s   = vs2_line_e = 0;
>       } else {
> -             ref_line     = 1 + (mode->vsync_start - mode->vdisplay)/2;
> -             vwin1_line_s = (mode->vtotal - mode->vdisplay)/2;
> -             vwin1_line_e = vwin1_line_s + mode->vdisplay/2;
> +             ref_line     = 1 + (adj_mode->vsync_start -
> +                                             adj_mode->vdisplay)/2;
> +             vwin1_line_s = (adj_mode->vtotal - adj_mode->vdisplay)/2;
> +             vwin1_line_e = vwin1_line_s + adj_mode->vdisplay/2;
>               vs1_pix_s    = vs1_pix_e = hs_pix_s;
> -             vs1_line_s   = (mode->vsync_start - mode->vdisplay)/2;
> +             vs1_line_s   = (adj_mode->vsync_start - adj_mode->vdisplay)/2;
>               vs1_line_e   = vs1_line_s +
> -                            (mode->vsync_end - mode->vsync_start)/2;
> -             vwin2_line_s = vwin1_line_s + mode->vtotal/2;
> -             vwin2_line_e = vwin2_line_s + mode->vdisplay/2;
> -             vs2_pix_s    = vs2_pix_e = hs_pix_s + mode->htotal/2;
> -             vs2_line_s   = vs1_line_s + mode->vtotal/2 ;
> +                            (adj_mode->vsync_end - adj_mode->vsync_start)/2;
> +             vwin2_line_s = vwin1_line_s + adj_mode->vtotal/2;
> +             vwin2_line_e = vwin2_line_s + adj_mode->vdisplay/2;
> +             vs2_pix_s    = vs2_pix_e = hs_pix_s + adj_mode->htotal/2;
> +             vs2_line_s   = vs1_line_s + adj_mode->vtotal/2 ;
>               vs2_line_e   = vs2_line_s +
> -                            (mode->vsync_end - mode->vsync_start)/2;
> +                            (adj_mode->vsync_end - adj_mode->vsync_start)/2;
>       }
>  
> -     div = 148500 / mode->clock;
> +     div = 148500 / adj_mode->clock;
>  
>       /* mute the audio FIFO: */
>       reg_set(priv, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_FIFO);
> @@ -896,9 +897,9 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
>        * TDA19988 requires high-active sync at input stage,
>        * so invert low-active sync provided by master encoder here
>        */
> -     if (mode->flags & DRM_MODE_FLAG_NHSYNC)
> +     if (adj_mode->flags & DRM_MODE_FLAG_NHSYNC)
>               reg_set(priv, REG_VIP_CNTRL_3, VIP_CNTRL_3_H_TGL);
> -     if (mode->flags & DRM_MODE_FLAG_NVSYNC)
> +     if (adj_mode->flags & DRM_MODE_FLAG_NVSYNC)
>               reg_set(priv, REG_VIP_CNTRL_3, VIP_CNTRL_3_V_TGL);
>  

Using the adj_mode->flags breaks a workaround I had done on BeagleBone Black
(tilcdc + tda998x) to resolve an issue with out of spec syncs from the
tlcdc.  I invert the HSYNC in adj_mode->flags but don't want the tda998x to
really know that I am doing that so I use adj_mode in the tilcdc driver, and
mode here in the tda998x driver.  The theory being adj_mode contains whatever
workarounds I need to do for the driving device and mode has the pristine
values that I want to send to the monitor.  I would need to look if there is a
different way to solve this as I am guessing you are actually using adj_mode in
the manner it was intended.

Otherwise this patch series is working on BeagleBone Black - I have only tried
video so far (not audio).

Darren

>       /*
> @@ -906,9 +907,9 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
>        * revert input stage toggled sync at output stage
>        */
>       reg = TBG_CNTRL_1_TGL_EN;
> -     if (mode->flags & DRM_MODE_FLAG_NHSYNC)
> +     if (adj_mode->flags & DRM_MODE_FLAG_NHSYNC)
>               reg |= TBG_CNTRL_1_H_TGL;
> -     if (mode->flags & DRM_MODE_FLAG_NVSYNC)
> +     if (adj_mode->flags & DRM_MODE_FLAG_NVSYNC)
>               reg |= TBG_CNTRL_1_V_TGL;
>       reg_write(priv, REG_TBG_CNTRL_1, reg);
>  
> @@ -949,11 +950,10 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
>               reg_write(priv, REG_ENC_CNTRL, ENC_CNTRL_CTL_CODE(1));
>               reg_set(priv, REG_TX33, TX33_HDMI);
>  
> -             tda998x_write_avi(priv, adjusted_mode);
> +             tda998x_write_avi(priv, adj_mode);
>  
>               if (priv->params.audio_cfg)
> -                     tda998x_configure_audio(priv, adjusted_mode,
> -                                             &priv->params);
> +                     tda998x_configure_audio(priv, adj_mode, &priv->params);
>       }
>  }
>  
> -- 
> 1.8.5.3
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to