This fixes a regression caused by b2ea4aa67bfd084834edd070e0a4a47857d6db59
due to the way shared ddc with multiple digital connectors was handled.
You generally have two cases where DDC lines are shared:
- HDMI + VGA
- HDMI + DVI-D
HDMI + VGA is easy to deal with because you can check the EDID for the
to see if the attached monitor is digital. A shared DDC line with two
digital connectors is more complex. You can't use the hdmi bits in the
EDID since they may not be there with DVI<->HDMI adapters. In this case
all we can do is check the HPD pins to see which is connected as we have
no way of knowing using the EDID.
Reported-by: trapdo...@gmail.com
Signed-off-by: Alex Deucher <alexdeuc...@gmail.com>
Cc: sta...@kernel.org
---
drivers/gpu/drm/radeon/radeon_connectors.c | 23 +++++++++--------------
1 files changed, 9 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c
b/drivers/gpu/drm/radeon/radeon_connectors.c
index f58f8bd..adccbc2 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -771,14 +771,14 @@ static enum drm_connector_status radeon_dvi_detect(struct
drm_connector *connect
} else
ret = connector_status_connected;
- /* multiple connectors on the same encoder with the
same ddc line
- * This tends to be HDMI and DVI on the same encoder
with the
- * same ddc line. If the edid says HDMI, consider the
HDMI port
- * connected and the DVI port disconnected. If the
edid doesn't
- * say HDMI, vice versa.
+ /* This gets complicated. We have boards with VGA +
HDMI with a
+ * shared DDC line and we have boards with DVI-D + HDMI
with a shared
+ * DDC line. The latter is more complex because with
DVI<->HDMI adapters
+ * you don't really know what's connected to which port
as both are digital.
*/
if (radeon_connector->shared_ddc && (ret ==
connector_status_connected)) {
struct drm_device *dev = connector->dev;
+ struct radeon_device *rdev = dev->dev_private;
struct drm_connector *list_connector;
struct radeon_connector *list_radeon_connector;
list_for_each_entry(list_connector,
&dev->mode_config.connector_list, head) {
@@ -788,15 +788,10 @@ static enum drm_connector_status radeon_dvi_detect(struct
drm_connector *connect
if (list_radeon_connector->shared_ddc &&
(list_radeon_connector->ddc_bus->rec.i2c_id ==
radeon_connector->ddc_bus->rec.i2c_id)) {
- if
(drm_detect_hdmi_monitor(radeon_connector->edid)) {
- if
(connector->connector_type == DRM_MODE_CONNECTOR_DVID) {
-
kfree(radeon_connector->edid);
-
radeon_connector->edid = NULL;
- ret =
connector_status_disconnected;
- }
- } else {
- if
((connector->connector_type == DRM_MODE_CONNECTOR_HDMIA) ||
-
(connector->connector_type == DRM_MODE_CONNECTOR_HDMIB)) {
+ /* cases where both connectors
are digital */
+ if
(list_connector->connector_type != DRM_MODE_CONNECTOR_VGA) {
+ /* hpd is our only
option in this case */
+ if
(!radeon_hpd_sense(rdev, radeon_connector->hpd.hpd)) {
kfree(radeon_connector->edid);
radeon_connector->edid = NULL;
ret =
connector_status_disconnected;
--
1.7.1.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
