Il giorno dom, 02/05/2010 alle 19.11 +1000, Dave Airlie ha scritto: > On Sat, May 1, 2010 at 10:42 PM, GhePeU <ghe...@virgilio.it> wrote: > > Il giorno mar, 27/04/2010 alle 18.57 -0400, Alex Deucher ha scritto: > >> On Tue, Apr 27, 2010 at 6:24 PM, GhePeU <ghe...@virgilio.it> wrote: > >> > Il giorno mar, 27/04/2010 alle 18.11 -0400, Alex Deucher ha scritto: > >> >> On Tue, Apr 27, 2010 at 5:30 PM, GhePeU <ghe...@virgilio.it> wrote: > >> >> > Il giorno gio, 15/04/2010 alle 13.41 -0400, Alex Deucher ha scritto: > >> >> >> >From 837feb147c531219c7315857a6f17e145af8f750 Mon Sep 17 00:00:00 > >> >> >> >2001 > >> >> >> From: Alex Deucher <alexdeuc...@gmail.com> > >> >> >> Date: Thu, 15 Apr 2010 13:31:12 -0400 > >> >> >> Subject: [PATCH] drm/radeon/kms: fix tv dac conflict resolver > >> >> > > >> >> > Hi, > >> >> > > >> >> > a few days ago I upgraded to the last 2.6.34 rc kernel and found that > >> >> > with > >> >> > KMS both the console and X were using a 800x600 resolution instead of > >> >> > my LCD > >> >> > display's native resolution of 1440x900 who was selected by default > >> >> > with > >> >> > 2.6.33 and previous kernels. > >> >> > > >> >> > I tracked the problem to this patch, which causes the same issues also > >> >> > when manually applied to 2.6.33: apparently the kms radeon driver > >> >> > wrongly detects a TV connected to my card (I don't have one, only a > >> >> > LCD > >> >> > display connected to the DVI port) and forces the TV default > >> >> > resolution > >> >> > for all the outputs. > >> >> > >> >> You issue is not related to the patch. What the patch does is allow > >> >> you to use the digital part of DVI plus TV at the same time. The > >> >> analog part of the DVI port and the TV share the same DAC so they > >> >> can't be used at the same time. Prior to the patch, both the TV and > >> >> DVI were detected as attached, but the TV was always disabled since it > >> >> was wrongly seen as conflicting with the DVI. > >> >> > >> >> Your issue is actually a matter of load detection for TV not always > >> >> being reliable. I don't know what a proper fix would be. We could > >> >> disable load detection for TV to avoid false positives, but that would > >> >> prevent automatic detection of TV which does work in most cases. > >> >> > >> >> Alex > >> >> > >> > > >> > With UMS however I don't have this problem, is the logic different? > >> > > >> > Shouldn't the driver behavior with KMS be the same, in this case? At > >> > least there wouldn't be (apparent) regressions like the one I'm > >> > experiencing. > >> > > >> > >> UMS does not enable load detection on TV by default while KMS does, > >> the difference being KMS provides both the console and X so you want > >> to make sure you put something up on whatever monitors or tvs happen > >> to be attached. I'm not sure what the best answer is here. > >> > >> Alex > > > > Would it be possible to add a module option to disable tv load > > detection? As things are now I must always change back the resolution to > > 1440x900 and disable the TV. > > try booting with video=TV-1:d > > Dave.
Didn't work, both console and X started at 800x600. Giacomo _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel
