On Tue, Mar 17, 2020 at 03:33:55PM +0100, Andreas Pflug wrote: > I see redundancy still used in the current documentation at > https://www.linbit.com/linstor-setup-proxmox-ve-volumes/ , so it appears > to me as being switched from "documented/supported" to "not supported" > directly, without a deprecation phase.
This is an old blog post. Sorry, I do not intend to update ever blog post I have ever written for ever. The only alternative is to stop writing blog posts. The documentation, which is the only source of truth (not some years old blog post), states: "The preferred way to use the plugin, starting from version 4.1.0, is via LINSTOR resource groups and a single volume group within every resource group. LINSTOR resource groups are described in Resource groups. All the required LINSTOR configuration (e.g., redundancy count) has to be set on the resource group."[1] I tagged v4.1.0 on: "Date: Mon Sep 16 11:30:54 2019 +0200". People had enough time. And I announce(d) it here in the RC1. I did not sneak it in. Switching an existing config to RGs is trivial. I really really think this is acceptable for not having to maintain tons of legacy layers that would most likely introduce bugs. Regards, rck [1] https://www.linbit.com/drbd-user-guide/users-guide-linstor/#s-proxmox-ls-ls-configuration _______________________________________________ Star us on GITHUB: https://github.com/LINBIT drbd-user mailing list [email protected] https://lists.linbit.com/mailman/listinfo/drbd-user
