Hello all new to the group,
DRBD9 was working just fine. I moved servers to the datacenter after a few
weeks of testing. I loaded two VMs and I thought they had synced. I guess
they didn’t. The primary is fine. I have since added new images to the
primary but not being passed. I guess due to the error on the two resources in
diskless state. The secondary in this state:
VE1 is primary
VE2 is secondary
VE1> says connecting for all resources, but volumes are UpToDate. Guess it is
due to the errors on the secondary.
VE2> drbdadm status
.drbdctrl role:Secondary
volume:0 disk:UpToDate
volume:1 disk:UpToDate
ve1 role:Primary
volume:0 peer-disk:UpToDate
volume:1 peer-disk:UpToDate
vm-102-disk-1 role:Secondary
disk:Diskless
vm-107-disk-1 role:Secondary
disk:Diskless
I tried to disconnect and adjust, disconnect and —force down, up. I just get
this error:
VE2: adjust
open(/dev/drbdpool/vm-102-disk-1_00) failed: No such file or directory
Command 'drbdmeta 100 v09 /dev/drbdpool/vm-102-disk-1_00 internal apply-al'
terminated with exit code 20
open(/dev/drbdpool/vm-107-disk-1_00) failed: No such file or directory
Command 'drbdmeta 101 v09 /dev/drbdpool/vm-107-disk-1_00 internal apply-al'
terminated with exit code 20
VE2: connect all
.drbdctrl: Failure: (125) Device has a net-config (use disconnect first)
Command 'drbdsetup connect .drbdctrl 0' terminated with exit code 10
vm-102-disk-1: Failure: (162) Invalid configuration request
additional info from kernel:
unknown connection
Command 'drbdsetup connect vm-102-disk-1 1' terminated with exit code 10
vm-107-disk-1: Failure: (162) Invalid configuration request
additional info from kernel:
unknown connection
Command 'drbdsetup connect vm-107-disk-1 1' terminated with exit code 10
I don’t have any resources on the secondary. So If there is a way to just have
it drop it all and pull from primary again that works. Or how can I repair
this state so I can get the secondary to pull the other images.
Thanks again for any advice,
Jason
_______________________________________________
drbd-user mailing list
[email protected]
http://lists.linbit.com/mailman/listinfo/drbd-user
