Aki, This image doesn't have a director service, just the dovecot is running.
Marc, I'm running the docker container in a privileged mode and it doesn't seem to have any issues reaching out to the outside network. I will try running with default config and see what fails. Thanks & Regards, Naveen On Mon, Dec 30, 2019 at 4:16 PM Aki Tuomi <aki.tu...@open-xchange.com> wrote: > You could also try our docker images, see https://hub.docker.com/u/dovecot > > Aki > > On 30/12/2019 12:18 Naveen Reddy <naveenredd...@gmail.com> wrote: > > > I'm not using internal logging. I'm running the docker with the logging to > the host. > I have used the same options you have specified. > The problem is that the below processes are not running inside docker > container whereas the standalone dovecot is running these processes(meaning > without container) > > dovecot-Dovecot/auth > dovecot-Dovecot/ssl-params > dovecot-Director/lmtp > dovecot-Director/ssl-params > dovecot-Director/imap-login director > > > Thanks & Regards, > Naveen > > > On Mon, Dec 30, 2019 at 3:16 PM Marc Roos < m.r...@f1-outsourcing.eu> > wrote: > > > If you are running your container as root. You will not have the issues > I encountered. Dovecot is dropping to the 'dovecot' and 'dovenull'(?) > when needed, this is fine. > > PS. I would not recommend using internal logging, use something like > this to log to the host or remote syslog. > docker run -v /dev/log:/dev/log -it dovecot-proxy > > > -----Original Message----- > Subject: Re: Issue running Dovecot in Docker Container > > Hi Marc, > > I can see the processes are running as a root in container environment. > Do you think that still have issues ? > Here is the processes running inside container: > > bash-4.2# ps -ef > UID PID PPID C STIME TTY TIME CMD > root 1 0 0 Dec27 ? 00:00:00 /bin/bash /bootstrap.sh > root 7 1 0 Dec27 ? 00:00:00 /usr/sbin/dovecot -F -c > /etc/dovecot/director.conf > root 8 1 0 Dec27 ? 00:00:00 /usr/sbin/dovecot -F > root 9 1 0 Dec27 ? 00:00:00 sleep 36000d > dovecot 10 8 0 Dec27 ? 00:00:00 dovecot-Dovecot/anvil > dovecot 14 7 0 Dec27 ? 00:00:00 dovecot-Director/anvil > root 267 8 0 Dec27 ? 00:00:00 dovecot-Dovecot/log > root 269 8 0 Dec27 ? 00:00:08 dovecot-Dovecot/config > root 281 7 0 Dec27 ? 00:00:00 dovecot-Director/log > root 283 7 0 Dec27 ? 00:00:00 dovecot-Director/config > > > > > Thanks & Regards, > Naveen > > > > On Mon, Dec 30, 2019 at 2:56 PM Marc Roos < m.r...@f1-outsourcing.eu> > wrote: > > > > I have noticed several issues with dovecot, trying to run it > without > root. Which is preferable in any container environment. Maybe you > would > like me to document these somewhere? So at some point they can be > applied. > > > -----Original Message----- > From: Naveen Reddy [mailto: naveenredd...@gmail.com] > Sent: 30 December 2019 09:02 > To: Aki Tuomi > Cc: dovecot@dovecot.org > Subject: Re: Issue running Dovecot in Docker Container > > Hi, I can see those values correctly with the doveconf -nc > command. > Here > is the part of output: > > bash-4.2# doveconf -nc /etc/dovecot/director.conf # 2.2.36 > (1f10bfa63): > /etc/dovecot/director.conf # OS: Linux > 4.1.12-112.14.11.el7uek.x86_64 > x86_64 Red Hat Enterprise Linux Server release 7.7 (Maipo) # > Hostname: > 69b492645b56 auth_debug = yes auth_default_realm = > xxxxxxxxxxxxxxxx > > auth_verbose = yes base_dir = /var/run/dovecot_director > debug_log_path = > $log_path director_mail_servers = xxxxxxxxxxxxxxxxxx > director_servers = > xxxxxxxxxxxxxxxxxxxx disable_plaintext_auth = no first_valid_uid = > 1000 > hostname = xxxxxxxxxxxxxxxxxxxx info_log_path = $log_path > instance_name > = Director lmtp_proxy = yes log_path = /dovecot.log > login_log_format_elements = user=<%u> method=%m rip=%r lip=%l > mpid=%e %c > home=%h > > Thanks & Regards, > Naveen > > > > On Fri, Dec 27, 2019 at 10:08 PM Aki Tuomi > < aki.tu...@open-xchange.com> > wrote: > > > > Can you check with `doveconf -nc /path/to/director.conf` > that the > values are actually set correctly? > > Aki > > On 27/12/2019 15:34 Naveen Reddy > < naveenredd...@gmail.com> > wrote: > > > > The conf.d files are not included. I have added > !include > conf.d/*.conf to director.conf and reloaded the dovecot and > director > services. > > conf.d/10-logging also has the following lines: > > log_path = /dovecot.log > info_log_path = $log_path > debug_log_path = $log_path > > > The /dovecot.log file still shows empty. Nothing > is being > logged to that file. > > > Thanks & Regards, > Naveen > > > > On Thu, Dec 26, 2019 at 10:52 PM Aki Tuomi < > aki.tu...@open-xchange.com> wrote: > > > > Do you have !include or !try_include in > director.conf? > The conf.d files are not included otherwise. > > Aki > > On 26/12/2019 11:27 Naveen Reddy < > naveenredd...@gmail.com> wrote: > > > I have tried these in the > 10-logging.conf but no > luck. There is nothing logged to the file. > > bash-4.2# ps -ef > UID PID PPID C STIME TTY > > TIME CMD > root 1 0 0 Dec23 ? > > 00:00:00 > /bin/bash /bootstrap.sh > root 8 1 0 Dec23 ? > > 00:00:00 > sleep 36000d > root 15681 0 0 08:51 > pts/1 > 00:00:00 bash > root 16340 0 0 09:19 ? > > 00:00:00 > /usr/sbin/dovecot -c /etc/dovecot/director.conf > dovecot 16341 16340 0 09:19 ? > > 00:00:00 > dovecot-Director/anvil > root 16342 16340 0 09:19 ? > > 00:00:00 > dovecot-Director/log > root 16344 16340 0 09:19 ? > > 00:00:00 > dovecot-Director/config > root 16390 0 0 09:22 ? > > 00:00:00 > /usr/sbin/dovecot -c /etc/dovecot/dovecot.conf > dovecot 16391 16390 0 09:22 ? > > 00:00:00 > dovecot-Dovecot/anvil > root 16392 16390 0 09:22 ? > > 00:00:00 > dovecot-Dovecot/log > root 16394 16390 0 09:22 ? > > 00:00:00 > dovecot-Dovecot/config > root 16406 15681 0 09:22 > pts/1 > 00:00:00 ps > -ef > > > The below processes are not > starting as well. > > dovecot-Dovecot/auth > dovecot-Dovecot/ssl-params > dovecot-Director/lmtp > dovecot-Director/ssl-params > dovecot-Director/imap-login > director > > Thanks & Regards, > Naveen > > > > On Tue, Dec 24, 2019 at 10:54 PM > Aki Tuomi < > aki.tu...@open-xchange.com> wrote: > > > > > > On 24/12/2019 > 12:33 > Naveen Reddy < > naveenredd...@gmail.com> wrote: > > > Hello, > > We need help with > an issue that we are > running into when we are trying to run Dovecot in Docker > container. > > Also how do we > enable debugging for > dovecot. Logs doesn't show any info about the issue. > > Below processes > are > not running when a > Director service is started: > > > dovecot-Dovecot/auth > > dovecot-Dovecot/ssl-params > > dovecot-Director/lmtp > > dovecot-Director/ssl-params > > dovecot-Director/imap-login director > > Here is the > version > that I'm running and > including the dovecot -n output below: > > bash-4.2# dovecot > --version > 2.2.36 > > > bash-4.2# dovecot > -n > # 2.2.36 (xxxxx): > /etc/dovecot/dovecot.conf > # OS: Linux > 4.1.12-112.14.11.el7uek.x86_64 > x86_64 Red Hat Enterprise Linux Server release 7.7 (Maipo) > # Hostname: > XXXXXXX > auth_debug = yes > auth_default_realm > = xxxxxxxxxxxx > auth_verbose = yes > > disable_plaintext_auth = no > dotlock_use_excl = > no > hostname = > xxxxxxxxxxxxxxxx > instance_name = > Dovecot > > login_log_format_elements = user=<%u> > method=%m rip=%r lip=%l mpid=%e %c home=% domain=%d > mail_debug = yes > mail_fsync = > always > mail_gid = imapd > mail_home = > /xxxxxxxxxxx/%d/%n > mail_location = > dbox:~/ > mail_uid = imapd > mmap_disable = yes > passdb { > args = > /etc/dovecot/lookups/ldap-pass.conf > driver = ldap > } > passdb { > args = > /etc/dovecot/lookups/xxxx.conf > driver = ldap > } > plugin { > stats_refresh = > 30 secs > stats_track_cmds > = yes > } > protocols = imap > lmtp > service auth { > client_limit = > 4096 > unix_listener > auth-userdb { > mode = 0777 > } > } > service imap-login > { > chroot = login > client_limit = 0 > > drop_priv_before_exec = no > executable = > imap-login > extra_groups = > group = > idle_kill = 0 > inet_listener > imap { > address = > port = 1144 > ssl = no > } > inet_listener > imaps { > address = > port = 994 > ssl = yes > } > privileged_group > = > process_limit = > 0 > > process_min_avail > = 0 > protocol = imap > service_count = > 50 > type = login > user = > $default_login_user > vsz_limit = > 18446744073709551615 B > } > service imap { > service_count = > 50 > } > service lmtp { > executable = > lmtp > -L > inet_listener > lmtp { > address = > port = 10025 > } > } > service stats { > fifo_listener > stats-mail { > mode = 0600 > user = imapd > } > } > ssl_cert = > </xxxxxxx/cert/dovecot.pem > ssl_cipher_list = > XXXXXX > ssl_key = # > hidden, use -P to show it > ssl_protocols = > XXXXX > userdb { > args = > /etc/dovecot/lookups/ldap-user.conf > driver = ldap > } > userdb { > args = > /etc/dovecot/lookups/xxxxxxx.conf > driver = ldap > } > > > Thanks & Regards, > Naveen > > > > Try setting > > log_path=/dovecot.log > info_log_path=$log_path > debug_log_path=$log_path > --- > Aki Tuomi > > > --- > Aki Tuomi > > > --- > Aki Tuomi > > > > > > > --- > Aki Tuomi > >
