Hi again,
Chasing down one last problem which seems to have been missed from my
last email:
On 20/10/2017 9:22 PM, Stephan Bosch wrote:
Op 20-10-2017 om 4:23 schreef Reuben Farrelly:
On 18/10/2017 11:40 PM, Timo Sirainen wrote:
On 18 Oct 2017, at 6.34, Reuben Farrelly <reuben-dove...@reub.net>
wrote:
This problem below is still present in 2.3 -git, as of version 2.3.devel
(6fc40674e)
Secondly, this ssl_dh messages is always printed from doveconf:
doveconf: Warning: please set ssl_dh=</etc/dovecot/dh.pem
doveconf: Warning: You can generate it with: dd
if=/var/lib/dovecot/ssl-parameters.dat bs=1 skip=88 | openssl dh
-inform der > /etc/dovecot/dh.pem
Yet the file is there:
thunderstorm conf.d # ls -la /etc/dovecot/dh.pem
-rw-r--r-- 1 root root 769 Oct 19 21:55 /etc/dovecot/dh.pem
And the config is there as well:
thunderstorm dovecot # doveconf -P | grep ssl_dh
ssl_dh = </etc/dovecot/dh.pem
doveconf: Warning: please set ssl_dh=</etc/dovecot/dh.pem
doveconf: Warning: You can generate it with: dd
if=/var/lib/dovecot/ssl-parameters.dat bs=1 skip=88 | openssl dh
-inform der > /etc/dovecot/dh.pem
ssl_dh = -----BEGIN DH PARAMETERS-----
ssl_dh = -----BEGIN DH PARAMETERS-----
ssl_dh = -----BEGIN DH PARAMETERS-----
ssl_dh = -----BEGIN DH PARAMETERS-----
ssl_dh = -----BEGIN DH PARAMETERS-----
ssl_dh = -----BEGIN DH PARAMETERS-----
ssl_dh = -----BEGIN DH PARAMETERS-----
ssl_dh = -----BEGIN DH PARAMETERS-----
thunderstorm dovecot #
It appears that this warning is being triggered by the presence of
the ssl-parameters.dat file because when I remove it the warning
goes away. Perhaps the warning could be made a bit more specific
about this file being removed if it is not required because at the
moment the warning message is not related to the trigger.
Thanks,
Reuben
Thanks,
Reuben
