Trying to get different scope/ranges/vlans to work differently with !known My problem seems to be that dhcp-ignore=tag:!known seems to enforce across all defined dhcp-rages..
(for this project I am currently using openwrt fwiw.. dnsmasq-full package on 22.03.5) I have a vlan42, vlan172, vlan512 dhcp-range=set:vlan42,192.168.48.100,192.168.48.199,255.255.255.0,2h dhcp-option=vlan42,3,192.168.48.1 dhcp-option=vlan42,6,10.20.0.6 dhcp-option=vlan42,15,test.v42 dhcp-range=set:vlan172,172.16.48.100,172.16.48.199,255.255.255.0,2h dhcp-option=vlan172,3,172.16.48.1 dhcp-option=vlan172,6,172.16.48.1 dhcp-option=vlan172,15,test.v172 dhcp-range=set:vlan512,10.120.56.10,10.120.58.254,255.255.252.0,2h dhcp-option=vlan512,option:router,10.120.59.1 dhcp-option=vlan512,option:dns-server,10.120.59.1 dhcp-option=vlan512,option:domain-name,test.v512 /etc/ethers works for statically assigning IPs and if I defined entries with dhcp-host=11:22:33:*:*:* this will work for devices that match.. but if I want vlan42 to accept unknown mac addresses.. when dhcp-ignore=tag:!known is enabled.. I cannot do get an address if the mac is unknown.. Is there a way for a range (vlan42 for example) to either be excluded.. or can I somehow define what scopes/ranges are subject to being !known? I have tried a myriad of things.. and could not predictively get this to work.. dhcp-host=*:*:*:*:*:*,set:vlan42 (this caused problems on other scopes) or dhcp-host=*:*:*:*:*:*,tag:vlan42 (this did not seem to do anything) dhcp-host=aa:bb:cc:11:22:33,set,test The optional set:<tag> sets an alphanumeric label which marks this network so that DHCP options may be specified on a per-network basis. When it is prefixed with 'tag:' instead, then its meaning changes from setting a tag to matching it. Only one tag may be set, but more than one tag may be matched. when I put a valid mac in there and renew with that host, I can see the label that I set, but I cannot see the label when I use tag.. I thought I was onto something with that.. but could not get it to work.. >From the documentation it seemed that a dhcp-host=*:*:*:*:*:*,tag:vlan42,set:known would give me what I am looking for (when !known is defined) Is this possible? Or am I doing something wrong? Thank you in advance. _______________________________________________ Dnsmasq-discuss mailing list Dnsmasq-discuss@lists.thekelleys.org.uk https://lists.thekelleys.org.uk/cgi-bin/mailman/listinfo/dnsmasq-discuss
