On Fri, 18 Sep 2020 14:51:58 +0200 Didier Kryn <k...@in2p3.fr> wrote:
> Le 18/09/2020 à 12:58, Olaf Meeuwissen a écrit : > > You are aware of ifplugd (and libdaemon0 on which it depends) > > originate, right? > > Yep. But this one just works. There might be exceptions (~: Just for completion, the following is my upnet.sh script, which sets my wired ethernet port to a specific address with a specific route/gateway: =========================================== #!/bin/bash ip link set dev enp3s0 down ip addr add 192.168.0.2/24 dev enp3s0 ip addr add 192.168.0.102/24 dev enp3s0 ip link set dev enp3s0 up ip route add default via 192.168.0.1 =========================================== The preceding works on any Linux distro: No need to jump through each distro's patented hoops. In the preceding, my NIC is called enp3s0, I'm setting the computer's address to 192.168.0.2, with alias address 192.168.0.102 for use of my unbound DNS server, getting Internet through a router at 192.168.0.1. This script throws errors if used more than once, but still sets the network correctly in spite of the errors. Any time my network gets discombubolated, my first step is to rerun upnet.sh. SteveT Steve Litt Autumn 2020 featured book: Thriving in Tough Times http://www.troubleshooters.com/thrive _______________________________________________ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
