On Thu, Nov 22, 2018 at 03:10:15PM +0100, Miroslav Skoric wrote: > Hello all, > > What is needed to install so that Devuan Jessie recognizes Huawei modems:
I just dug out one of my old dongles and plugged it into a debian testing laptop. The mode switch seems to be automatic, which is what I remembered, and someone else said had been true of recent kernels. Here is an extract from dmesg: ----------------------------------------------------------------- [ 464.222099] usb 2-9: Product: HUAWEI Mobile [ 464.222102] usb 2-9: Manufacturer: HUAWEI Technology [ 464.226948] usb-storage 2-9:1.0: USB Mass Storage device detected [ 464.248341] usb-storage 2-9:1.1: USB Mass Storage device detected [ 464.276381] usb-storage 2-9:1.2: USB Mass Storage device detected [ 464.277385] scsi host6: usb-storage 2-9:1.2 [ 464.277705] usb-storage 2-9:1.3: USB Mass Storage device detected [ 464.279210] scsi host7: usb-storage 2-9:1.3 [ 464.816572] usbcore: registered new interface driver usbserial_generic [ 464.816580] usbserial: USB Serial support registered for generic [ 464.819253] usbcore: registered new interface driver option [ 464.819261] usbserial: USB Serial support registered for GSM modem (1-port) [ 464.819317] option 2-9:1.0: GSM modem (1-port) converter detected [ 464.819385] usb 2-9: GSM modem (1-port) converter now attached to ttyUSB0 [ 464.819423] option 2-9:1.1: GSM modem (1-port) converter detected [ 464.819484] usb 2-9: GSM modem (1-port) converter now attached to ttyUSB1 [ 465.315154] scsi 7:0:0:0: Direct-Access HUAWEI MMC Storage 2.31 PQ: 0 ANSI: 2 [ 465.317098] scsi 6:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 465.336190] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 465.344432] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 465.346732] sr 6:0:0:0: [sr1] scsi-1 drive [ 465.346986] sr 6:0:0:0: Attached scsi CD-ROM sr1 [ 465.347078] sr 6:0:0:0: Attached scsi generic sg3 type 5 ------------------------------------------------------------------------ Note the connections to /dev/ttyUSB0 & /dev/ttyUSB1. You use these in the chat/ppp scripts. I can probably dig out my versions somewhere if you need them. Extract from lsusb -v -s 002:004 : ----------------------------------------------------------------- Bus 002 Device 004: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E230/E270/E870 HSDPA/HSUPA Modem Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x12d1 Huawei Technologies Co., Ltd. idProduct 0x1003 E220 HSDPA Modem / E230/E270/E870 HSDPA/HSUPA Modem bcdDevice 0.00 iManufacturer 2 HUAWEI Technology iProduct 1 HUAWEI Mobile iSerial 0 bNumConfigurations 1 ----------------------------------------------------------------------------- extract from lsmod: ------------------------------------------------------------------------------ Module Size Used by option 53248 0 usb_wwan 20480 1 option usbserial 53248 2 usb_wwan,option uas 28672 0 usb_storage 69632 1 uas ------------------------------------------------------------------------------- ***************************************************** I also dug out an old ZTE dongle and plugged that in. From dmesg: ------------------------------------------------------------------- [ 1233.858740] usb 2-9: new high-speed USB device number 5 using xhci_hcd [ 1234.007890] usb 2-9: New USB device found, idVendor=19d2, idProduct=1514, bcdDevice= 0.01 [ 1234.007893] usb 2-9: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 1234.007895] usb 2-9: Product: MF192 [ 1234.007897] usb 2-9: Manufacturer: ZTE [ 1234.007899] usb 2-9: SerialNumber: MF6910TMOD000000 [ 1234.008947] usb-storage 2-9:1.0: USB Mass Storage device detected [ 1234.009175] scsi host6: usb-storage 2-9:1.0 [ 1234.599317] usb 2-9: USB disconnect, device number 5 [ 1243.398719] usb 2-9: new high-speed USB device number 6 using xhci_hcd [ 1243.548381] usb 2-9: New USB device found, idVendor=19d2, idProduct=1515, bcdDevice= 0.01 [ 1243.548385] usb 2-9: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 1243.548388] usb 2-9: Product: MF192 [ 1243.548390] usb 2-9: Manufacturer: ZTE [ 1243.548392] usb 2-9: SerialNumber: 5012F02B32EB2D2EFCBFD096F7C39FE6485DEC7C [ 1243.552969] usb-storage 2-9:1.4: USB Mass Storage device detected [ 1243.553277] scsi host6: usb-storage 2-9:1.4 [ 1244.085356] cdc_acm 2-9:1.0: ttyACM0: USB ACM device [ 1244.085737] cdc_acm 2-9:1.2: ttyACM1: USB ACM device [ 1244.085984] cdc_acm 2-9:1.5: ttyACM2: USB ACM device [ 1244.086241] usbcore: registered new interface driver cdc_acm [ 1244.086242] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1244.555094] scsi 6:0:0:0: Direct-Access ZTE Storage 0001 PQ: 0 ANSI: 0 [ 1244.594843] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 1244.595547] sd 6:0:0:0: [sdb] Attached SCSI removable disk ----------------------------------------------------------------------- Again, note the /dev/ACM0, /dev/ACM1 and /dev/ACM2 nodes. The corresponding ppp/chat scripts use these devices. Again, I can probably dig out those if you really want them. I assume that more modern dongles/modems will be similar. ael _______________________________________________ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
