On Sat, 17 Nov 2018 21:26:07 +0000, Daniel wrote in message <0ed76638-06d3-bf40-7485-38905d46d...@danielabrecht.ch>:
> Hi everyone, > > I've taken a look at purisms' image-builder scripts, and then made my > own for the devkit based on them to get an overview of all the > components and how things work together. I don't have a devkit yet, > so I don't have any idea if the images generated by my scripts will > actually boot, but for those interested, this is what I've got so far: > https://github.com/Daniel-Abrecht/librem5-image-builder > https://gitlab.com/DanielAbrecht/librem5-image-builder > > It creates a really basic image at the moment, with almost nothing > installed. But I think that's good enough for now, I can still add > more things if it turns out to actually work. > > Also, I probably forgot to list a lot of the necessary packages to > use this. ..you want to do a separate "make repo" and a "make clean-repo-too", and possibly move the repo out of the build/ tree, say, to repo/ or repos/ if you have multiple repos now or later. ..such extra heavy repo/ etc trees are easily symlinked back into the build/ tree. ..another tip is run your own lan repo mirror and point REPO = there, that way you can feed _several_ build boxes cheaply. -- ..med vennlig hilsen = with Kind Regards from Arnt Karlsen ...with a number of polar bear hunters in his ancestry... Scenarios always come in sets of three: best case, worst case, and just in case. _______________________________________________ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
