I'm trying to install ASCII on a Compaq presaria C700.According to the live boot USB cli, it has a Broadcom BCM4311 802.11 b/g WLAN [14e4"4311] rev 02 for the wireless adapter. The install complains, as it should, and ask for two files, the names of which are duplicated for some reason: b43/ucode13.fw and b43-open/ucode13.fw. After much searching and downloading and building from instructions, I now have two copies of the file ucode13.fw; one from build instructions and one from a github download with sizes 28,216 and 29,008 respectively. Using a FAT32 usb drive and several attempts, I decided to do the following:Using Gparted on this Refracta laptop, I recreated a partition from scratch using all of the drive and formatting it to ext4 format. I then creatd the following structure in hopes of covering all the bases:It contains: /ucode13.fw/b43/ucode13.fw/b43-open/ucode13.fw I did this based on the installer message: "The missing files are: b43/ucode.fw b43/ucode13.fw b43-open/ucode.fw b43-open/ucode.fw" The permissions are set to 755 at all levels. They are owned by root. The installer tags the usb drive twice, computes a bit, and then tags the drive three times before giving up and putting up the original message. Any ideas as to how to proceed? Thank you.
_______________________________________________ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
