Il giorno Sun, 18 Feb 2018 22:30:02 +0000
KatolaZ <[email protected]> ha scritto:
> On Sun, Feb 18, 2018 at 11:26:48PM +0100, Alessandro Selli wrote:
>> Hello,
>> I wish to know if anyone has had issues installing Devuan Ascii
>> Beta 2.0.0 with cryptsetup partitions on 32 bit systems using the
>> graphical install. I did today, and when I got to defining the
>> partitioning and filesystem layout, I set:
>>
>> /dev/sda1 -> ext4 -> /boot
>> /dev/sda2 -> sda2_crypt -> ext4 -> /
>> /dev/sda3 -> sda3_crypt -> ext4 -> /usr
>> /dev/sda5 -> sda5_crypt -> ext4 -> /home
>> /dev/sda6 -> sda6_crypt -> swap
>>
>> So far, so good. However, when I clicked on the button to finalize the
>> layout, format che crypted partitions ant mount them for the installation
>> to begin, I got the error that sda2_crypt failed to be mounted on /. I
>> tried several times and I always got the same error. The log console
>> (tty8?) did not show anything relevant, and neither did dmesg.
>> I opened a terminal, I checked that the devices in /dev/mapper did
>> exist. I formatted them by hand with mkfs.ext4 and I could mount
>> /dev/mapper/sda2_crypt on /target (I also tried to mount it on another
>> directory under /, but I cannot remember it's name; maybe /system?). No
>> joy: the error popped up again and the installer would not allow me to go
>> ahead.
>>
>> I'd like to know if it's it a known problem with the installer. Of
>> course, I'd like someone to propose a workaround, something that could be
>> done on the terminal to manually format and install the crypted
>> partitions, skip the disk setup step and go ahead with the installation.
>>
>>
>
> Hi Alessandro,
>
> thanks a lot for your report. It would be great to have the
> /var/log/syslog created by d-i at install time. That would help
> debugging the issue, maybe.
All right, today I redid the installation. Same laptop, same DVD:
devuan_ascii_2.0.0-beta_i386_DVD
Just two changes: I did not select the Italian language and I chose the TUI
install over the graphical one.
I found the HD partitionned the way I set it up on the first install, so I
went ahead and defined the crypt partitions and their filesystems. And the
installation went ahead!
But the joy did not last long: after it configured the ethernet connection
via DHCP, I selected the packages.devuan.org mirror to get the packages
from. And I stumbled on this message:
[!!] Configuring libssl1.0.2:i386
/media/cdrom/: Please insert the disc labeled: 'Debian GNU/Linux
2.0.0-beta _Ascii_ - Official i386 DVD Binary-1 20180213-21:10' in
the drive '/media/cdrom/' and press [Enter].
Which was a show stopper. Did I do something wrong?
Bye,
Alessandro
_______________________________________________
Dng mailing list
[email protected]
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
