Found a workaround that works. I assigned 127.0.0.1 in my /etc/hosts file to www.127.0.0.1 and everything works. From the research I have done I cannot prove conclusively if this is a problem on Ubuntu 12.04 machines or not because I could not find other people who were facing the same issue.
In addition I am not sure if assigning the above causes any security issues but since it is just a name I think it should be fine. This issue may be related to not assigning a fully qualified domain name to the Linux host. Thanks for your help Anton and hope this helps others. Cheers, nav On Tuesday, August 28, 2012 9:30:39 AM UTC+5:30, nav wrote: > > Hi Anton, > > Thank you for your email. > > I have tried all of the methods you had suggested but to no avail. > > In all my years of Django development the localhost address has worked > flawlessly. I have also tried with multiple Django projects and other > Linux installations and the problem persists. This makes me think this > is a DNS issue that may be due to a network related problem. In which > case I will have to investigate. I will post once I find a work around > or solution. > > Cheers, > nav > > On Aug 27, 5:36 pm, Anton Baklanov <antonbakla...@gmail.com> wrote: > > oh, i misunderstood your question. > > > > try to type url with schema into browser's address bar. i mean, use ' > http://localhost:8000/'instead of 'localhost:8000'. > > also it's possible that some browser extension does this, try disabling > > them all. > > > > > > > > > > > > > > > > > > > > On Mon, Aug 27, 2012 at 10:53 AM, nav <navanitach...@gmail.com> wrote: > > > Dear Folks, > > > > > I am running my django development server on 127.0.0.1:8000 and > accessing > > > this address from my web browser on the same machine. In the past few > days > > > I have found thet the web browsers keep prepending the address with > "www." > > > when using the above address. 127.0.0.1 without the prot number works > fine > > > but the django development server requires a port number. > > > > > I have not encountered this problem before and am puzzled by what is > > > happening. I am working on a Kubuntu 12.04 linux box and my > /etc/hosts/ > > > file is below if that helps: > > > > > ==================== > > > 127.0.0.1 localhost > > > 127.0.1.1 <mymachinename> > > > > > # The following lines are desirable for IPv6 capable hosts > > > ::1 ip6-localhost ip6-loopback > > > fe00::0 ip6-localnet > > > ff00::0 ip6-mcastprefix > > > ff02::1 ip6-allnodes > > > ff02::2 ip6-allrouters > > > ==================== > > > > > TIA > > > Cheers, > > > nav > > > > > -- > > > You received this message because you are subscribed to the Google > Groups > > > "Django users" group. > > > To view this discussion on the web visit > > >https://groups.google.com/d/msg/django-users/-/EZzlz6iQOGoJ.> To post > to this group, send email todjango-us...@googlegroups.com. > > > To unsubscribe from this group, send email to> > django-users+unsubscr...@googlegroups.com. > > > For more options, visit this group at > > >http://groups.google.com/group/django-users?hl=en. > > > > -- > > Regards, > > Anton Baklanov > -- You received this message because you are subscribed to the Google Groups "Django users" group. To view this discussion on the web visit https://groups.google.com/d/msg/django-users/-/dJ1NiROz2WkJ. To post to this group, send email to django-users@googlegroups.com. To unsubscribe from this group, send email to django-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/django-users?hl=en.