Thanks Ben!

Initially i had done some wrong configuration using vxlan.

Now i am using gre for tunneling. But i could still see vxlan ports in
ovs-vsctl show output.

Is there any option can can read current configuration files and remove the
non required configuration from ovs-vsctl .

I mean i am looking for reset option.


[root@OSKVM1 nova]# ovs-vsctl show
602ca311-4ebe-4773-8d58-00d1a0161294
    Bridge br-int
        fail_mode: secure
        Port patch-tun
            Interface patch-tun
                type: patch
                options: {peer=patch-int}
        Port br-int
            Interface br-int
                type: internal
        Port "qr-2fdc65ca-3a"
            tag: 2
            Interface "qr-2fdc65ca-3a"
                type: internal
        Port int-br-ex
            Interface int-br-ex
                type: patch
                options: {peer=phy-br-ex}
        Port "tap4763d73b-95"
            tag: 1
            Interface "tap4763d73b-95"
                type: internal
        Port "qg-a690c808-49"
            tag: 1
            Interface "qg-a690c808-49"
                type: internal
        Port "tape364c044-4f"
            tag: 2
            Interface "tape364c044-4f"
                type: internal
    Bridge br-ex
        Port "p5p2"
            Interface "p5p2"
        Port phy-br-ex
            Interface phy-br-ex
                type: patch
                options: {peer=int-br-ex}
        Port br-ex
            Interface br-ex
                type: internal
    Bridge br-tun
        fail_mode: secure
        Port "vxlan-0a180005"
            Interface "vxlan-0a180005"
                type: vxlan
                options: {df_default="true", in_key=flow,
local_ip="10.24.0.4", out_key=flow, remote_ip="10.24.0.5"}
        Port br-tun
            Interface br-tun
                type: internal
        Port "gre-0a180005"
            Interface "gre-0a180005"
                type: gre
                options: {df_default="true", in_key=flow,
local_ip="10.24.0.4", out_key=flow, remote_ip="10.24.0.5"}
        Port patch-int
            Interface patch-int
                type: patch
                options: {peer=patch-tun}
    ovs_version: "2.5.0"
[root@OSKVM1 nova]#
[root@OSKVM1 ~]# nova list


On Thu, Oct 13, 2016 at 2:05 PM, Ben Pfaff <b...@ovn.org> wrote:

> From an OVS perspective, yes.
>
> From an OpenStack perspective, you'd be better off asking on an
> OpenStack mailing list.
>
> On Thu, Oct 13, 2016 at 09:54:04AM -0400, Gaurav Goyal wrote:
> > Awaiting your response please!
> >
> > Can i use management interface as tunneling interface?
> >
> >
> > Regards
> > Gaurav Goyal
> >
> > On Thu, Oct 13, 2016 at 6:52 AM, Gaurav Goyal <er.gauravgo...@gmail.com>
> > wrote:
> >
> > > Dear Team,
> > >
> > > I am working on liberty version of openstack environment.
> > >
> > > As per generic liberty openstack guide, i was using linux bridging with
> > > vxlan, but want to move to ovs.
> > >
> > > I need your help to configure my platform as per OVS requirement.
> > >
> > > My architecture is
> > >
> > > Node 1 - controller + network + compute1
> > > Node 2 --> compute2
> > >
> > > As a classic installation guide , using 2 interfaces on each node
> > > p5p1 -- management
> > > p5p2 -- unnumbered (external)
> > >
> > >
> > > Please help me to configure ml1_conf.ini and openvswitch_agent.ini
> file.
> > >
> > > I do not find standard doc on openstack page.
> > >
> > > Here is my configuration setup following kilo guide
> > >
> > >    1. [root@OSKVM1 ~]# grep -v "^#" /etc/neutron/plugins/ml2/ml2_
> conf.ini|grep
> > >    -v ^$
> > >    2. [ml2]
> > >    3. type_drivers = flat,vlan,vxlan
> > >    4. tenant_network_types = vxlan
> > >    5. mechanism_drivers = openvswitch,l2population
> > >    6. extension_drivers = port_security
> > >    7. [ml2_type_flat]
> > >    8. flat_networks = public
> > >    9. [ml2_type_vlan]
> > >    10. [ml2_type_gre]
> > >    11. [ml2_type_vxlan]
> > >    12. vni_ranges = 1:1000
> > >    13. [ml2_type_geneve]
> > >    14. [securitygroup]
> > >    15. [root@OSKVM1 ~]# grep -v "^#" /etc/neutron/plugins/ml2/
> openvswitch_agent.ini|grep
> > >    -v ^$
> > >    16. [ovs]
> > >    17. integration_bridge = br-int
> > >    18. tunnel_bridge = br-tun
> > >    19. local_ip = 10.24.0.4
> > >    20. [agent]
> > >    21. tunnel_types = vxlan
> > >    22. [securitygroup]
> > >    23. [root@OSKVM1 ~]# grep -v "^#" /etc/neutron/dhcp_agent.ini|grep
> -v
> > >    ^$
> > >    24. [DEFAULT]
> > >    25. interface_driver = neutron.agent.linux.interface.
> OVSInterfaceDriver
> > >    26. dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq
> > >    27. enable_isolated_metadata = True
> > >    28. dnsmasq_config_file = /etc/neutron/dnsmasq-neutron.conf
> > >    29. [AGENT]
> > >    30. [root@OSKVM1 ~]# history|grep ovs-vsctl add
> > >    31. grep: add: No such file or directory
> > >    32. [root@OSKVM1 ~]# history|grep ovs-vsctl
> > >    33.   846  ovs-vsctl show
> > >    34.   922  ovs-vsctl show
> > >    35.   924   ovs-vsctl-show
> > >    36.   925   ovs-vsctl show
> > >    37.   931  ovs-vsctl show
> > >    38.   933  ovs-vsctl add-br br-ex
> > >    39.   934  ovs-vsctl add-port br-ex p5p2
> > >    40.   935  ovs-vsctl show
> > >
> > >
> > > [root@OSKVM1 neutron]# ovs-vsctl show
> > > 602ca311-4ebe-4773-8d58-00d1a0161294
> > >
> > >     Bridge br-ex
> > >
> > >         Port br-ex
> > >
> > >             Interface br-ex
> > >
> > >                 type: internal
> > >
> > >         Port "p5p2"
> > >
> > >             Interface "p5p2"
> > >
> > >     Bridge br-int
> > >
> > >         fail_mode: secure
> > >
> > >         Port patch-tun
> > >
> > >             Interface patch-tun
> > >
> > >                 type: patch
> > >
> > >                 options: {peer=patch-int}
> > >
> > >         Port br-int
> > >
> > >             Interface br-int
> > >
> > >                 type: internal
> > >
> > >         Port "tap33501010-4d"
> > >
> > >             Interface "tap33501010-4d"
> > >
> > >                 type: internal
> > >
> > >     Bridge br-tun
> > >
> > >         fail_mode: secure
> > >
> > >         Port "vxlan-0a180005"
> > >
> > >             Interface "vxlan-0a180005"
> > >
> > >                 type: vxlan
> > >
> > >                 options: {df_default="true", in_key=flow,
> > > local_ip="10.24.0.4", out_key=flow, remote_ip="10.24.0.5"}
> > >
> > >         Port br-tun
> > >
> > >             Interface br-tun
> > >
> > >                 type: internal
> > >
> > >         Port patch-int
> > >
> > >             Interface patch-int
> > >
> > >                 type: patch
> > >
> > >                 options: {peer=patch-tun}
> > >
> > >     ovs_version: "2.5.0"
> > >
> > >
> > >
> > > [root@OSKVM1 neutron]# ovs-vsctl list-ports br-ex
> > >
> > > p5p2
> > >
> > > [root@OSKVM1 neutron]# ovs-vsctl list-ports br-int
> > >
> > > patch-tun
> > >
> > > tap33501010-4d
> > >
> > > [root@OSKVM1 neutron]# ifconfig -a
> > >
> > > br-ex: flags=4098<BROADCAST,MULTICAST>  mtu 1500
> > >
> > >         ether a0:36:9f:87:f7:d5  txqueuelen 0  (Ethernet)
> > >
> > >         RX packets 0  bytes 0 (0.0 B)
> > >
> > >         RX errors 0  dropped 12573  overruns 0  frame 0
> > >
> > >         TX packets 0  bytes 0 (0.0 B)
> > >
> > >         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
> > >
> > >
> > > br-int: flags=4098<BROADCAST,MULTICAST>  mtu 1500
> > >
> > >         ether f2:fd:fb:5c:96:43  txqueuelen 0  (Ethernet)
> > >
> > >         RX packets 0  bytes 0 (0.0 B)
> > >
> > >         RX errors 0  dropped 8  overruns 0  frame 0
> > >
> > >         TX packets 0  bytes 0 (0.0 B)
> > >
> > >         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
> > >
> > >
> > > br-tun: flags=4098<BROADCAST,MULTICAST>  mtu 1500
> > >
> > >         ether 6e:06:ab:85:70:46  txqueuelen 0  (Ethernet)
> > >
> > >         RX packets 0  bytes 0 (0.0 B)
> > >
> > >         RX errors 0  dropped 0  overruns 0  frame 0
> > >
> > >         TX packets 0  bytes 0 (0.0 B)
> > >
> > >         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
> > >
> > >
> > > brq7ec081e4-5d: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1450
> > >
> > >         inet6 fe80::7e:27ff:fea9:796f  prefixlen 64  scopeid 0x20<link>
> > >
> > >         ether 1e:bc:5d:27:7e:75  txqueuelen 0  (Ethernet)
> > >
> > >         RX packets 8  bytes 508 (508.0 B)
> > >
> > >         RX errors 0  dropped 0  overruns 0  frame 0
> > >
> > >         TX packets 8  bytes 648 (648.0 B)
> > >
> > >         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
> > >
> > >
> > > em1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 9000
> > >
> > >         inet 10.35.0.4  netmask 255.255.255.0  broadcast 10.35.0.255
> > >
> > >         inet6 fe80::eef4:bbff:fed9:1568  prefixlen 64  scopeid
> 0x20<link>
> > >
> > >         ether ec:f4:bb:d9:15:68  txqueuelen 1000  (Ethernet)
> > >
> > >         RX packets 10757  bytes 724798 (707.8 KiB)
> > >
> > >         RX errors 0  dropped 0  overruns 0  frame 0
> > >
> > >         TX packets 272  bytes 11652 (11.3 KiB)
> > >
> > >         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
> > >
> > >
> > > em2: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
> > >
> > >         ether ec:f4:bb:d9:15:6a  txqueuelen 1000  (Ethernet)
> > >
> > >         RX packets 0  bytes 0 (0.0 B)
> > >
> > >         RX errors 0  dropped 0  overruns 0  frame 0
> > >
> > >         TX packets 0  bytes 0 (0.0 B)
> > >
> > >         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
> > >
> > >
> > > em3: flags=4098<BROADCAST,MULTICAST>  mtu 1500
> > >
> > >         ether ec:f4:bb:d9:15:6c  txqueuelen 1000  (Ethernet)
> > >
> > >         RX packets 0  bytes 0 (0.0 B)
> > >
> > >         RX errors 0  dropped 0  overruns 0  frame 0
> > >
> > >         TX packets 0  bytes 0 (0.0 B)
> > >
> > >         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
> > >
> > >         device memory 0x91a80000-91afffff
> > >
> > >
> > > em4: flags=4098<BROADCAST,MULTICAST>  mtu 1500
> > >
> > >         ether ec:f4:bb:d9:15:6d  txqueuelen 1000  (Ethernet)
> > >
> > >         RX packets 0  bytes 0 (0.0 B)
> > >
> > >         RX errors 0  dropped 0  overruns 0  frame 0
> > >
> > >         TX packets 0  bytes 0 (0.0 B)
> > >
> > >         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
> > >
> > >         device memory 0x91a00000-91a7ffff
> > >
> > >
> > > lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
> > >
> > >         inet 127.0.0.1  netmask 255.0.0.0
> > >
> > >         inet6 ::1  prefixlen 128  scopeid 0x10<host>
> > >
> > >         loop  txqueuelen 0  (Local Loopback)
> > >
> > >         RX packets 246932194  bytes 319184736555 (297.2 GiB)
> > >
> > >         RX errors 0  dropped 0  overruns 0  frame 0
> > >
> > >         TX packets 246932194  bytes 319184736555 (297.2 GiB)
> > >
> > >         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
> > >
> > >
> > > ovs-system: flags=4098<BROADCAST,MULTICAST>  mtu 1500
> > >
> > >         ether ea:a6:8d:26:10:7e  txqueuelen 0  (Ethernet)
> > >
> > >         RX packets 0  bytes 0 (0.0 B)
> > >
> > >         RX errors 0  dropped 0  overruns 0  frame 0
> > >
> > >         TX packets 0  bytes 0 (0.0 B)
> > >
> > >         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
> > >
> > >
> > > p5p1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
> > >
> > >         inet 10.24.0.4  netmask 255.255.255.224  broadcast 10.24.0.31
> > >
> > >         inet6 fe80::a236:9fff:fe87:f7d4  prefixlen 64  scopeid
> 0x20<link>
> > >
> > >         ether a0:36:9f:87:f7:d4  txqueuelen 1000  (Ethernet)
> > >
> > >         RX packets 69961147  bytes 28103399130 (26.1 GiB)
> > >
> > >         RX errors 0  dropped 0  overruns 0  frame 0
> > >
> > >         TX packets 66026779  bytes 16612105684 (15.4 GiB)
> > >
> > >         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
> > >
> > >         device memory 0x91f00000-91ffffff
> > >
> > >
> > > p5p2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
> > >
> > >         inet6 fe80::a236:9fff:fe87:f7d5  prefixlen 64  scopeid
> 0x20<link>
> > >
> > >         ether a0:36:9f:87:f7:d5  txqueuelen 1000  (Ethernet)
> > >
> > >         RX packets 10630260  bytes 6850866320 (6.3 GiB)
> > >
> > >         RX errors 0  dropped 0  overruns 0  frame 0
> > >
> > >         TX packets 6506871  bytes 1069537087 (1019.9 MiB)
> > >
> > >         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
> > >
> > >         device memory 0x91e00000-91efffff
> > >
> > >
> > > p5p3: flags=4098<BROADCAST,MULTICAST>  mtu 1500
> > >
> > >         ether a0:36:9f:87:f7:d6  txqueuelen 1000  (Ethernet)
> > >
> > >         RX packets 0  bytes 0 (0.0 B)
> > >
> > >         RX errors 0  dropped 0  overruns 0  frame 0
> > >
> > >         TX packets 0  bytes 0 (0.0 B)
> > >
> > >         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
> > >
> > >         device memory 0x91d00000-91dfffff
> > >
> > >
> > > p5p4: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
> > >
> > >         ether a0:36:9f:87:f7:d7  txqueuelen 1000  (Ethernet)
> > >
> > >         RX packets 0  bytes 0 (0.0 B)
> > >
> > >         RX errors 0  dropped 0  overruns 0  frame 0
> > >
> > >         TX packets 0  bytes 0 (0.0 B)
> > >
> > >         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
> > >
> > >         device memory 0x91c00000-91cfffff
> > >
> > >
> > > virbr0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
> > >
> > >         inet 192.168.122.1  netmask 255.255.255.0  broadcast
> > > 192.168.122.255
> > >
> > >         ether 52:54:00:9a:cc:bf  txqueuelen 0  (Ethernet)
> > >
> > >         RX packets 0  bytes 0 (0.0 B)
> > >
> > >         RX errors 0  dropped 0  overruns 0  frame 0
> > >
> > >         TX packets 0  bytes 0 (0.0 B)
> > >
> > >         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
> > >
> > >
> > > virbr0-nic: flags=4098<BROADCAST,MULTICAST>  mtu 1500
> > >
> > >         ether 52:54:00:9a:cc:bf  txqueuelen 500  (Ethernet)
> > >
> > >         RX packets 0  bytes 0 (0.0 B)
> > >
> > >         RX errors 0  dropped 0  overruns 0  frame 0
> > >
> > >         TX packets 0  bytes 0 (0.0 B)
> > >
> > >         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
> > >
> > >
> > > vxlan-2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1450
> > >
> > >         ether 1e:bc:5d:27:7e:75  txqueuelen 0  (Ethernet)
> > >
> > >         RX packets 6  bytes 396 (396.0 B)
> > >
> > >         RX errors 0  dropped 0  overruns 0  frame 0
> > >
> > >         TX packets 0  bytes 0 (0.0 B)
> > >
> > >         TX errors 0  dropped 2 overruns 0  carrier 0  collisions 0
> > >
> > >
> > >
> > >
> > >
> > > Regards
> > > Gaurav Goyal
> > >
> > >
>
> > _______________________________________________
> > discuss mailing list
> > discuss@openvswitch.org
> > http://openvswitch.org/mailman/listinfo/discuss
>
>
_______________________________________________
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss

Reply via email to