I have tried installing Open vSwitch in raspberry PI. The following link will help you a lot. https://sdntestbed.wordpress.com/2015/07/03/install-open-vswitch-on-raspberry-pi/ I recommend you using the image released in 2016-05-27, with a GCC 4.9 installed instead of 4.8 Due to memory limitations in raspberry, when you compile the Open vSwitch code, some tests may be failed. I recommend you compile the code without tests. Good luck!
Zhao Jun > From: jpet...@ovn.org > Date: Mon, 29 Aug 2016 23:33:49 -0700 > To: mohamed_ibrahem1...@yahoo.com > CC: b...@openvswitch.org > Subject: Re: [ovs-discuss] raspberrypi 2B as openvswitch > > I've never tried setting it up, but there have been posts in the past about > doing it. I don't think there should be anything particular to Raspberry Pi > that should be a problem. However, depending on your application, it's > possible there could be issues with wireless NICs as documented in the FAQ. > > Good luck! > > --Justin > > > > On Aug 29, 2016, at 12:39 PM, Mohamed Ibrahem > > <mohamed_ibrahem1...@yahoo.com> wrote: > > > > hello guys, > > please, help me to make my raspberry pi 2 model B as an openflow switch 1.0 > > openflow protocol support . > > thanks in advance > > _______________________________________________ > > discuss mailing list > > discuss@openvswitch.org > > http://openvswitch.org/mailman/listinfo/discuss > > _______________________________________________ > discuss mailing list > discuss@openvswitch.org > http://openvswitch.org/mailman/listinfo/discuss
_______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss
