Hi , Can any one help me or correct me if, my approach is wrong to test dpdk along with OVS. ThanksShyam Yeduru
> From: acon...@redhat.com > To: yedurush...@hotmail.com > CC: christian.ehrha...@canonical.com; discuss@openvswitch.org > Subject: Re: [ovs-discuss] OVS+DPDK issue on Ubuntu 16.04 > Date: Mon, 11 Jul 2016 13:28:33 -0400 > > shyam yeduru <yedurush...@hotmail.com> writes: > > > Hi , > > > > Sorry for confusing you. I will explain my issue clearly. > > > > We have installed OVS and DPDK on Ubuntu14.04. We have done our > > configuration using Physical > > NIC and Virtual > > Functions (SR-IOV produced Interfaces). > > > > We have followed this link: > > https://software.intel.com/en-us/articles/using-open-vswitch-with-dpdk-for-inter-vm-nfv-applications > > > > > > We are unable to add dpdk on top of OVS bridge. > > > > Server configurations : > > root@kvmsriov:~# cat /proc/cmdline > > BOOT_IMAGE=/vmlinuz-4.4.0-28-generic root=/dev/mapper/kvmsriov--vg-root ro > > intel_iommu=on > > > > root@kvmsriov:~# grep Huge /proc/meminfo > > AnonHugePages: 5595136 kB > > HugePages_Total: 256 > > HugePages_Free: 256 > > HugePages_Rsvd: 0 > > HugePages_Surp: 0 > > Hugepagesize: 2048 kB > > root@kvmsriov:~# > > > > root@kvmsriov:~# dpdks -s > > Network devices using DPDK-compatible driver > > ============================================ > > 0000:07:00.0 '82599ES 10-Gigabit SFI/SFP+ Network Connection' drv=vfio-pci > > unused=ixgbe > > 0000:07:00.1 '82599ES 10-Gigabit SFI/SFP+ Network Connection' drv=vfio-pci > > unused=ixgbe > > 0000:07:10.0 '82599 Ethernet Controller Virtual Function' drv=vfio-pci > > unused=ixgbevf > > 0000:07:10.1 '82599 Ethernet Controller Virtual Function' drv=vfio-pci > > unused=ixgbevf > > Network devices using kernel driver > > =================================== > > 0000:03:00.0 'NetXtreme BCM5719 Gigabit Ethernet PCIe' if=eno1 drv=tg3 > > unused=vfio-pci > > *Active* > > 0000:03:00.1 'NetXtreme BCM5719 Gigabit Ethernet PCIe' if=eno2 drv=tg3 > > unused=vfio-pci > > 0000:03:00.2 'NetXtreme BCM5719 Gigabit Ethernet PCIe' if=eno3 drv=tg3 > > unused=vfio-pci > > 0000:03:00.3 'NetXtreme BCM5719 Gigabit Ethernet PCIe' if=eno4 drv=tg3 > > unused=vfio-pci > > Other network devices > > ===================== > > <none> > > > > OVS > > root@kvmsriov:~# ovs-vsctl show > > 910cdc54-e27f-4f5b-ae01-d180df6973ec > > Bridge "br0" > > Port "vhost-user1" > > Interface "vhost-user1" > > type: dpdkvhostuser > > error: "could not open network device vhost-user1 (Address > > family not supported by > > protocol)" > > Port "dpdk0" > > Interface "dpdk0" > > type: dpdk > > error: "could not open network device dpdk0 (Address family > > not supported by protocol)" > > Port "br0" > > Interface "br0" > > type: internal > > Bridge "ovsbr0" > > Port "vnet1" > > Interface "vnet1" > > Port "ovsbr0" > > Interface "ovsbr0" > > type: internal > > Port "vnet2" > > Interface "vnet2" > > ovs_version: "2.5.0" > > root@kvmsriov:~# > > > > Enclosed the logs of the server here with. Please do the needful. > > root@kvmsriov:~# tailf /var/log/openvswitch/ovs-vswitchd.log > > 2016-07-07T14:55:08.311Z|00091|bridge|INFO|bridge br0: using datapath ID > > 0000e21cf47fa440 > > 2016-07-07T14:55:08.311Z|00092|connmgr|INFO|br0: added service controller > > "punix:/var/run/openvswitch/br0.mgmt" > > 2016-07-07T14:55:13.488Z|00093|memory|INFO|peak resident set size grew 93% > > in last > > 600282.6 seconds, from 117000 kB to 225472 kB > > 2016-07-07T14:55:13.488Z|00094|memory|INFO|handlers:16 ports:4 > > revalidators:8 rules:10 > > 2016-07-07T14:55:19.411Z|00095|netdev|WARN|could not create netdev dpdk0 of > > unknown type > > dpdk > > 2016-07-07T14:55:19.411Z|00096|bridge|WARN|could not open network device > > dpdk0 (Address > > family not supported by protocol) > > 2016-07-07T14:55:37.723Z|00097|netdev|WARN|could not create netdev > > vhost-user1 of unknown > > type dpdkvhostuser > > 2016-07-07T14:55:37.723Z|00098|bridge|WARN|could not open network device > > vhost-user1 > > (Address family not supported by protocol) > > 2016-07-07T14:55:37.723Z|00099|netdev|WARN|could not create netdev dpdk0 of > > unknown type > > dpdk > > 2016-07-07T14:55:37.723Z|00100|bridge|WARN|could not open network device > > dpdk0 (Address > > family not supported by protocol) > > > > Please advise.... > > > > Thanks > > Shyam Yeduru > > > > > > ---------------------------------------------------------------------------------- > > From: christian.ehrha...@canonical.com > > Date: Thu, 7 Jul 2016 08:12:10 +0200 > > Subject: Re: [ovs-discuss] OVS+DPDK issue on Ubuntu 16.04 > > To: yedurush...@hotmail.com > > CC: discuss@openvswitch.org > > > > Hi, > > I beg a pardon but I'm not entirely clear what you mean with "... mount the > > Intel 10gig ..." > > Anyway what I've seen most often is that people struggle with some core > > parts of the setup and > > then get refused by OVS trying to add the DPDK port. > > What you report "...we are not able to add dpdk0 port to ovs bridge..." > > sounds very similar. > > > > In the past all questions I got only needed to check logs, identify the > > issue in base ovs+dpdk setup > > and then things started to work for them. > > Please take a look at > > http://askubuntu.com/questions/786510/using-openvswitch-with-dpdk-in-ubuntu-16-04/789203#789203 > > > > > > If it helps you please give it an upvote and let me know. > > I might consider adding this as a troubleshooting section to the > > serverguide if this really is a common > > case. > > > > Kind Regards, > > Christian > > > > Christian Ehrhardt > > Software Engineer, Ubuntu Server > > Canonical Ltd > > > > On Thu, Jul 7, 2016 at 6:54 AM, shyam yeduru <yedurush...@hotmail.com> > > wrote: > > > > Hi Christian, > > > > Thanks for writing us. We are able to mount the Intel 10gig DPDK Supported > > NIC Cards as > > stated in below url. > > Our Test Cases: > > 1.0 Intel 10gig with Pass Through on to Vyatta Router , Traffic Generator > > was IXIA (No DPDK > > Enabled Interfaces) > > 2.0 Intel 10gig with Pass Through on to Vyatta Router , Traffic Generator > > was IXIA ( DPDK > > Enabled Interfaces) > > 3.0 OVS Bridge Interfaces on to Vyatta Router, Traffic Generator was IXIA > > (No DPDK ) > > 4.0 OVS Bridge Interfaces on to Vyatta Router, Traffic Generator was IXIA > > (DPDK) > > > > From the above 4 scenarios, we are not able to add dpdk0 port to ovs > > bridge (4 Test Cases). > > > > OVS+DPDK > > > > http://openvswitch.org/support/dist-docs/INSTALL.DPDK.md.txt > > > > Pls advise, how to add the ovs along with dpdk . > > > > Thanks > > Shyam yeduru > > ---------------------------------------------------------------------------------- > > From: christian.ehrha...@canonical.com > > Date: Tue, 5 Jul 2016 18:32:15 +0200 > > Subject: Re: [ovs-discuss] OVS+DPDK issue on Ubuntu 16.04 > > To: yedurush...@hotmail.com > > CC: discuss@openvswitch.org; sy00454...@techmahindra.com > > > > Hi, > > The TL;DR is that in Ubuntu 16.04 the base openvswitch-switch package > > knows nothing about > > dpdk. > > But the openvswitch-switch-dpdk package does. > > > > please follow the whole page around > > https://help.ubuntu.com/16.04/serverguide/DPDK.html#dpdk-openvswitch for > > some > > guidance. > > > > Christian Ehrhardt > > Software Engineer, Ubuntu Server > > Canonical Ltd > > > > On Mon, Jul 4, 2016 at 9:51 AM, shyam yeduru <yedurush...@hotmail.com> > > wrote: > > > > Hi Team, > > > > We have used ovs+dpdk installed and trying to test with Brocade Vyatta VNF > > which is > > DPDK Supported. We were not able to add dpdk0 port to OVS Bridge. > > > > Error log : > > > > 2016-06-16T19:28:29.819Z|00021|bridge|INFO|bridge ovsbr0: added interface > > ovsbr0 > > on port 65534 > > 2016-06-16T19:28:29.819Z|00022|bridge|INFO|bridge ovsbr0: added interface > > vnet0 on > > port 2 > > 2016-06-16T19:28:29.819Z|00023|bridge|INFO|bridge ovsbr0: added interface > > enp7s16f4 on port 1 > > 2016-06-16T19:28:29.819Z|00024|netdev|WARN|could not create netdev dpdk0 of > > unknown type dpdk > > This usually implies that dpdk was not enabled. Can you send the output > of 'ps aux | grep ovs'? Specifically, DPDK must be initialized > explicitly to be usable (ie: for versions 2.5.0 and earlier, by passing > arguments on the command line). This can also indicate that the > openvswitch installed does not even have compiled support for dpdk > devices. > > > 2016-06-16T19:28:29.819Z|00025|bridge|WARN|could not open network device > > dpdk0 > > (Address family not supported by protocol) > > 2016-06-16T19:28:29.819Z|00026|bridge|INFO|bridge ovsbr1: added interface > > ovsbr1 > > on port 65534 > > 2016-06-16T19:28:29.819Z|00027|netdev|WARN|could not create netdev > > vhost-user1 > > of unknown type dpdkvhostuser > > 2016-06-16T19:28:29.819Z|00028|bridge|WARN|could not open network device > > vhost-user1 (Address family not supported by protocol) > > 2016-06-16T19:28:29.819Z|00029|bridge|INFO|bridge ovsbr0: using datapath ID > > 0000c67be1a7aa45 > > 2016-06-16T19:28:29.820Z|00030|connmgr|INFO|ovsbr0: added service > > controller > > "punix:/var/run/openvswitch/ovsbr0.mgmt" > > 2016-06-16T19:28:29.856Z|00031|bridge|INFO|bridge ovsbr1: using datapath ID > > 0000821322a5cb42 > > 2016-06-16T19:28:29.856Z|00032|connmgr|INFO|ovsbr1: added service > > controller > > "punix:/var/run/openvswitch/ovsbr1.mgmt" > > 2016-06-16T19:28:29.894Z|00033|netdev|WARN|could not create netdev dpdk0 of > > unknown type dpdk > > 2016-06-16T19:28:29.894Z|00034|bridge|WARN|could not open network device > > dpdk0 > > (Address family not supported by protocol) > > 2016-06-16T19:28:29.894Z|00035|netdev|WARN|could not create netdev > > vhost-user1 > > of unknown type dpdkvhostuser > > 2016-06-16T19:28:29.894Z|00036|bridge|WARN|could not open network device > > vhost-user1 (Address family not supported by protocol) > > 2016-06-16T19:28:29.896Z|00037|bridge|INFO|ovs-vswitchd (Open vSwitch) > > 2.5.0 > > > > Operating System : Ubuntu 16.04 > > Hardward : > > Manufacturer: HP > > Product Name: ProLiant DL380p Gen8 > > Intel 10gig DPDK Support with Intel SFP’s > > OpenvSwitch : > > Architecture: amd64 > > Source: openvswitch > > Version: 2.5.0-0ubuntu1 > > Depends: kmod | module-init-tools, netbase, openvswitch-common (= > > 2.5.0-0ubuntu1), > > procps, python-argparse, uuid-runtime, init-system-helpers (>= 1.18~), > > lsb-base (>= > > 4.1+Debian11ubuntu7), python:any, libc6 (>= 2.14), libcap-ng0, libssl1.0.0 > > (>= 1.0.0) > > Filename: > > pool/main/o/openvswitch/openvswitch-switch_2.5.0-0ubuntu1_amd64.deb > > > > OVS+DPDK > > Architecture: amd64 > > Source: openvswitch > > Version: 2.5.0-0ubuntu1 > > Depends: dpdk, openvswitch-switch (= 2.5.0-0ubuntu1), libc6 (>= 2.14), > > libcap-ng0, > > libdpdk0 (>= 2.2), libssl1.0.0 (>= 1.0.0) > > Filename: > > pool/main/o/openvswitch/openvswitch-switch-dpdk_2.5.0-0ubuntu1_amd64.deb > > > > Please advise, how do we proceed further and achieve configurations. > > _______________________________________________ > > discuss mailing list > > discuss@openvswitch.org > > http://openvswitch.org/mailman/listinfo/discuss > > > > _______________________________________________ > > discuss mailing list > > discuss@openvswitch.org > > http://openvswitch.org/mailman/listinfo/discuss
_______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss
