Okay, the ovs I had before this was 2.5.0. Which was pretty much perfect.
The one I have now on standalone hardware with Yocto is openvswitch-2.0.0 (Due
to some reason). Does this version not talk Openflow 1.3?
Should I enable openflow13 for my bridge explicitly like this ? :
ovs-vsctl set bridge br0 protocols=openflow10,openflow12,openflow13
Thanks,
Monica
-----Original Message-----
From: Ben Pfaff [mailto:b...@ovn.org]
Sent: Wednesday, June 22, 2016 3:07 PM
To: Rajasekaran, Monica <monica.rajaseka...@us.fujitsu.com>
Cc: discuss@openvswitch.org
Subject: Re: [ovs-discuss] changing path for startup
Type 16, stat 12 is undefined in OpenFlow 1.0 (version 1). In OpenFlow
1.3 it is OFPST_TABLE_FEATURES_REQUEST. Maybe the controller is trying to make
that request in version 1.0; it's not going to work there.
Just a guess though.
On Wed, Jun 22, 2016 at 06:49:03PM +0000, Rajasekaran, Monica wrote:
> Thanks Ben!
>
> Do you know what might cause this message ? Type 16 is for statistics right ?
>
> 2016-06-23T00:41:55Z|00025|ofp_msgs|WARN|unknown OpenFlow message
> (version 1, type 16, stat 12)
>
> It happens after my OVS is connected to the controller. Also sends out a bad
> response after this.
>
> Thanks,
> Monica
>
>
> -----Original Message-----
> From: Ben Pfaff [mailto:b...@ovn.org]
> Sent: Wednesday, June 22, 2016 12:42 PM
> To: Rajasekaran, Monica <monica.rajaseka...@us.fujitsu.com>
> Cc: discuss@openvswitch.org
> Subject: Re: [ovs-discuss] changing path for startup
>
> On Wed, Jun 22, 2016 at 04:17:38PM +0000, Rajasekaran, Monica wrote:
> > Hi,
> >
> > I built ovs along with Yocto, have it running inside my target hardware.
> >
> > When I start ovs by starting ovsdb server, vsctl and vswitchd, it gives me
> > the following error messages:
> >
> > When I start ovsdb server,
> >
> > 2016-06-22T23:54:25Z|00001|fatal_signal|WARN|could not unlink
> > "/usr/local/var/run/openvswitch/db.sock" (No such file or directory)
> > 2016-06-22T23:54:25Z|00002|stream_unix|ERR|/usr/local/var/run/openvs
> > witch/db.sock: binding failed: No such file or directory
> > 2016-06-22T23:54:25Z|00003|ovsdb_jsonrpc_server|ERR|punix:/usr/local
> > /var/run/openvswitch/db.sock: listen failed: No such file or
> > directory
> >
> > When I start vsctl,
> >
> > 2016-06-22T23:54:50Z|00003|reconnect|WARN|unix:/var/run/openvswitch/
> > db.sock: connection attempt failed (No such file or directory)
> > ovs-vsctl: unix:/var/run/openvswitch/db.sock: database connection
> > failed (No such file or directory)
> >
> > When I start vswitchd,
> >
> > 2016-06-22T23:55:14Z|00003|reconnect|WARN|unix:/var/run/openvswitch/
> > db.sock: connection attempt failed (No such file or directory)
> >
> > The problem is that it is looking for db.sock and the pid files at
> > "/usr/local/var/run/openvswitch" but actually it should be looking into
> > "/var/run/openvswitch" in Yocto. How do I change this ?? Or will creating a
> > symlink work?
>
> INSTALL.md says:
>
> By default all files are installed under /usr/local. Open vSwitch also
> expects to find its database in /usr/local/etc/openvswitch by default.
> If you want to install all files into, e.g., /usr and /var instead of
> /usr/local and /usr/local/var and expect to use /etc/openvswitch as the
> default
> database directory, add options as shown here:
>
> `% ./configure --prefix=/usr --localstatedir=/var
> --sysconfdir=/etc`
_______________________________________________
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
