On Mon, May 23, 2016 at 1:21 AM, Ayaka Koshibe <akosh...@gmail.com> wrote:
> Hi,
>
> I'm trying to see why I can't get traffic (a simple ping) across a bridge.
>
> I've installed openvswitch (2.3.2) from the ports tree, and started a
> userspace switch as follows:
>
> # /usr/local/etc/rc.d/ovsdb-server onestart
> # /usr/local/etc/rc.d/ovs-vswitchd onestart
> # ovs-vsctl add-br s1 -- set bridge s1 fail_mode=standalone
> other-config:disable-in-band=true datapath_type=netdev
> # ovs-vsctl add-port s1 s1-eth1
> # ovs-vsctl add-port s1 s1-eth2
>
> s1 inter-connects two jails with vimage using epairs.
>
> Referencing the instructions for starting a userspace switch, I see
> that the tap driver is loaded, and there is a /dev/tap0 and /dev/tap1
> (one for ovs-netdev and s1, I'm guessing).
>
> As far as I can see from 'ovs-vsctl list Interface' (i.e. the port
> counters) and tcpdump, the messages reach the input port (s1-eth1),
> but are never seen exiting the other. Looking at the logs, I don't see
> any warnings or errors.
>
> Searching seems to indicate that the above steps should 'just work',
> so I'm wondering if anyone has insight/pointers.
>
It seems that there was something broken about the particular VM that
I had been running; it worked as advertised on another VM.
_______________________________________________
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
