Hi all,
I have a short question regarding to the mirror ports. Is ist possible to
install more than one mirror on an ovs bridge?
I have a system which hosts 5 vm, all of these vms are connected to br1. The
interfaces are tap{1…5},
When I configure a mirror port (lets say tap4) to capture all traffic of tap1,
I use this command:
ovs-vsctl -- set Bridge br1 mirrors=@m \
-- --id=@src get Port tap1 \
-- --id=@mir get Port tap4 \
-- --id=@m create Mirror name=ovs_mirror select-dst-port=@src
select-src-port=@src output-port=@mir
The mirror is created successfully.
After that I try to create a second mirror on br1 with the same command, only
changed tap1 to tap2 and tap4 to tap3 and the mirror-name. This mirror is
created, too, but after that I miss my first mirror.
The created uuid of the mirror is different to the first one, so I think ovs
isn’t able to handle more than one mirror port on a bridge at the same time?
Which would be quite poor for my intended purpose
Thx
Daniel
_______________________________________________
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
