Hi all,

While this is not directly related to DPDK or OVS, it is potentially useful for users of both, so excuse me for cross-posting.

Quoting from the project README (for the full text see
http://laiskiainen.org/git/?p=driverctl.git;a=blob_plain;f=README)

> driverctl is a tool for manipulating and inspecting the system
> device driver choices.
>
> Devices are normally assigned to their sole designated kernel driver
> by default. However in some situations it may be desireable to
> override that default, for example to try an older driver to
> work around a regression in a driver or to try an experimental
> alternative driver. Another common use-case is pass-through
> drivers and driver stubs to allow userspace to drive the device,
> such as in case of virtualization.
>
> driverctl integrates with udev to support overriding
> driver selection for both cold- and hotplugged devices from the
> moment of discovery, but can also change already assigned drivers,
> assuming they are not in use by the system. The driver overrides
> created by driverctl are persistent across system reboots
> by default.
>
> Usage
> -----
>
> Find devices currently driven by ixgbe driver:
>
> # driverctl -v list-devices | grep ixgbe
> 0000:01:00.0 ixgbe (Ethernet 10G 4P X520/I350 rNDC)
> 0000:01:00.1 ixgbe (Ethernet 10G 4P X520/I350 rNDC)
>
> Change them to use the vfio-pci driver:
> # driverctl set-override 0000:01:00.0 vfio-pci
> # driverctl set-override 0000:01:00.1 vfio-pci
>
> Find devices with driver overrides:
> # driverctl -v list-devices|grep \\*
> 0000:01:00.0 vfio-pci [*] (Ethernet 10G 4P X520/I350 rNDC)
> 0000:01:00.1 vfio-pci [*] (Ethernet 10G 4P X520/I350 rNDC)
>
> Remove the override from slot 0000:01:00.1:
> # driverctl unset-override 0000:01:00.1

DPDK of course has its own dpdk_nic_bind(.py) tool for this purpose, the main differences to driverctl are:
- driverctl bindings are persistent across system boots
- driverctl bindings take place immediately on cold- and hotplug
- driverctl is a generic tool not limited to network adapters
- dpdk_nic_bind being a special purpose tool has many more
  sanity checks for its supported use-cases
- dpdk_nic_bind supports binding multiple NICs at once

The project currently lives at
    http://laiskiainen.org/git/?p=driverctl.git

Feedback, patches etc are welcome.

        - Panu -
_______________________________________________
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss

Reply via email to