My guess is that the Cisco switch is expecting traffic on VLAN 1 to be untagged 
since it is the native VLAN. Try setting a different native VLAN on the 
interfaces on the Cisco switch to see if that helps.

-- 
Scott

Sent from my mobile device

> On Jul 8, 2015, at 5:32 AM, yas nak <[email protected]> wrote:
> 
> Hi Forum
> 
> I am really new to OVS and trying to understand.  I am trying to get LACP 
> bonding to work on Ubuntu 14.04 and cisco switch.
> 
> I have configured the cisco 2960CG switch with the following config
> interface Port-channel1
>  switchport mode trunk
> !
> interface GigabitEthernet0/1
>  switchport mode trunk
>  channel-protocol lacp
>  channel-group 1 mode active
> !
> interface GigabitEthernet0/2
>  switchport mode trunk
>  channel-protocol lacp
>  channel-group 1 mode active
> 
>  On my Ubuntu x64 14.04.02 server I have installed openvswitch-switch.  I 
> have configured /etc/network/interfaces as
> 
> 
> auto lo
> iface lo inet loopback
> 
> auto p2p1
> iface p2p1 inet manual
> 
> auto p3p1
> iface p3p1 inet manual
> #
> # OVS Bridge
> #
> auto vmbr0
> iface vmbr0 inet manual
>   ovs_type OVSBridge
>   ovs_ports bond0 vlan1
> 
> allow-vmbr0 bond0
> iface bond0 inet manual
>   ovs_bridge vmbr0
>   ovs_type OVSBond
>   ovs_bonds p2p1 p3p1
>   ovs_options bond_mode=balance-tcp lacp=active other_config:lacp-time=fast 
> other_config:trunks=1
>  
> allow-vmbr0 vlan1
> iface vlan1 inet dhcp
>   ovs_type OVSIntPort
>   ovs_bridge vmbr0
>   ovs_options tag=1 
> 
> I can see using tcpdump -i p2p1 that the DHCP request is being responded on 
> my PC but VLAN1 never gets an IP assigned to the interface VLAN1
> 
> Could someone point me towards what I have configured incorrectly?
> 
> Thanks
> 
> Yas
> _______________________________________________
> discuss mailing list
> [email protected]
> http://openvswitch.org/mailman/listinfo/discuss
_______________________________________________
discuss mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/discuss

Reply via email to