On Fri, Apr 17, 2015 at 07:09:51AM -1000, Nicholas Bastin wrote:
> On Fri, Apr 17, 2015 at 12:54 AM, Amal KAMMOUN <amal.kamm...@supcom.tn>
> wrote:
>
> > When I installed Open vSwitch version 2.0.2 instead of 2.3.1 version I got
> > the OVS works with flowvisor.
> >
>
> FlowVisor doesn't know anything about OpenFlow versions after 1.0, and will
> crash if it receives a connection request from a non-1.0 datapath.
Amal: In that case the fix is easy. You just configure OVS to only
use OF1.0. The FAQ shows how:
### Q: What versions of OpenFlow does Open vSwitch support?
A: The following table lists the versions of OpenFlow supported by
each version of Open vSwitch:
Open vSwitch OF1.0 OF1.1 OF1.2 OF1.3 OF1.4 OF1.5
###============ ===== ===== ===== ===== ===== =====
1.9 and earlier yes --- --- --- --- ---
1.10 yes --- [*] [*] --- ---
1.11 yes --- [*] [*] --- ---
2.0 yes [*] [*] [*] --- ---
2.1 yes [*] [*] [*] --- ---
2.2 yes [*] [*] [*] [%] [*]
2.3 yes yes yes yes [*] [*]
[*] Supported, with one or more missing features.
[%] Experimental, unsafe implementation.
Open vSwitch 2.3 enables OpenFlow 1.0, 1.1, 1.2, and 1.3 by default
in ovs-vswitchd. In Open vSwitch 1.10 through 2.2, OpenFlow 1.1,
1.2, and 1.3 must be enabled manually in ovs-vswitchd. OpenFlow
1.4 and 1.5 are also supported, with missing features, in Open
vSwitch 2.3 and later, but not enabled by default. In any case,
the user may override the default:
- To enable OpenFlow 1.0, 1.1, 1.2, and 1.3 on bridge br0:
ovs-vsctl set bridge br0
protocols=OpenFlow10,OpenFlow11,OpenFlow12,OpenFlow13
- To enable OpenFlow 1.0, 1.1, 1.2, 1.3, 1.4, and 1.5 on bridge br0:
ovs-vsctl set bridge br0
protocols=OpenFlow10,OpenFlow11,OpenFlow12,OpenFlow13,OpenFlow14,OpenFlow15
- To enable only OpenFlow 1.0 on bridge br0:
ovs-vsctl set bridge br0 protocols=OpenFlow10
All current versions of ovs-ofctl enable only OpenFlow 1.0 by
default. Use the -O option to enable support for later versions of
OpenFlow in ovs-ofctl. For example:
ovs-ofctl -O OpenFlow13 dump-flows br0
(Open vSwitch 2.2 had an experimental implementation of OpenFlow
1.4 that could cause crashes. We don't recommend enabling it.)
[OPENFLOW-1.1+.md] in the Open vSwitch source tree tracks support for
OpenFlow 1.1 and later features. When support for OpenFlow 1.4 and
1.5 is solidly implemented, Open vSwitch will enable those version
by default. Also, the OpenFlow 1.5 specification is still under
development and thus subject to change.
_______________________________________________
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
