Hi Mailinglist, I have a Problem with a VM Box that should use LACP bonding with tagged VLAN ports.
Everything is up and running as I want to to, my Problem is that the speed is horrible. A simple ssh login takes 30ish seconds that 's why I spend a hour on debugging OpenSSH only to find out that iperf is showing interesting results. When I run iperf in Server mode on Box-A (OVS) and Box-B represents the iperf Client (untagged VLAN Port, same Switch, same Subnet) I get I get around 937MB/s. The other way around I barely get results because of timeouts. Here is my basic setup ###### ovs-vsctl show 8031569b-5210-4334-88fd-36704af3a667 Bridge "vmbr0" Port "vlan1115" tag: 1115 Interface "vlan1115" type: internal Port "bond0" Interface "eth1" Interface "eth2" Port "vmbr0" Interface "vmbr0" type: internal Port "vlan1116" tag: 1116 Interface "vlan1116" type: internal ovs_version: "2.3.1" ######## cat /etc/network/interfaces = http://pastebin.ca/2967191 ifconfig = http://pastebin.ca/2967192 ovs-appctl bond/show bond0 = http://pastebin.ca/2967193 ovs-appctl lacp/show bond0 = http://pastebin.ca/2967194 ovs-vsctl list port bond0 = http://pastebin.ca/2967200 Could anyone please point me in a direction to look at. Thanks a lot, Ben
_______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss