On Wed, Mar 04, 2015 at 01:45:44AM +0000, Ming-Ching Tiew wrote: > I posted this to virtualbox forum which I got no response and now I am > posting it here as it might be a openvswitch problem instead of virtualbox :- > I have used virtualbox with open vswitch without any problem when I am not > using VLAN. > > However, when I am using VLAN tagging in one of the open vswitch port, I > cannot get it working. > > Here is the host ( debian 14.04 64 bit ) :- > > for i in 0 1 > do > ovs-vsctl add-br br$i > ip tuntap add mode tap vnet$i > ip link set vnet$i up > ovs-vsctl add-port br$i vnet$i > done > > ifconfig br0 192.168.2.2 up > ifconfig br1 192.168.3.1 up > > # add a port to switch br0 to have vlan tagging > ip tuntap add mode tap vlan100 > ip link set vlan100 up > ovs-vsctl add-port br0 vlan100 tag=100 > > # optional settings > # set other ports to trunk and untagged > ovs-vsctl set port vnet0 trunks=100 > ovs-vsctl set port vnet0 vlan_mode=native-untagged > ovs-vsctl set port br0 trunks=100 > ovs-vsctl set port br0 vlan_mode=native-untagged
It does not make sense to specify native-untagged mode without specifying a tag, e.g. I guess you want to add tag=100 in each case. _______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss
