On Mon, Dec 8, 2014 at 1:58 AM, Emil Flink <emil.fl...@gmail.com> wrote: > Hi, > > I'm doing some testing with Open vSwitch 2.3.0 on Debian 7 (stable) compiled > from source and have encountered a fairly weird error. I don't know if it is > a problem with Debian or Open vSwitch. > > The mgmt0 interface comes up fully configured after reboot but is not > accessible until I have "used" the network from the server, ie. by pinging > another host. When you say it is not accessible, I suppose you mean that you cannot ping it from outside? If so, I would put tcpdump on your physical interfaces to see whether any request is even coming to your ethernet interfaces. I would suggest removing the bond and attach to a single physical interface to simplify your network configuration and see whether the problem still exists.
> > The very first ping will have a high ms of 1000+, indicating something is > going on in the background at this point. > > > My /etc/network/interfaces configuration: > > auto lo0 > iface lo inet loopback > > allow-vmbr0 vbond0 > iface vbond0 inet manual > ovs_bridge vmbr0 > ovs_type OVSBond > ovs_bonds eth0 eth1 > pre-up ( ifconfig eth0 mtu 9000 && ifconfig eth1 mtu 9000 ) > post-up ( ifconfig vbond0 mtu 9000 ) > ovs_options bond_mode=active-backup > > allow-ovs vmbr0 > iface vmbr0 inet manual > ovs_type OVSBridge > ovs_ports vbond0 mgmt0 > mtu 9000 > > allow-vmbr0 mgmt0 > iface mgmt0 inet static > ovs_bridge vmbr0 > ovs_type OVSIntPort > address 10.69.52.6 > netmask 255.255.255.0 > gateway 10.69.52.1 > dns-nameservers 10.69.8.254 > mtu 1500 > > _______________________________________________ > discuss mailing list > discuss@openvswitch.org > http://openvswitch.org/mailman/listinfo/discuss > _______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss
