This is now the fourth time I've asked for the output of "ovs-dpctl dump-flows" while the reply is coming through.
--Justin On August 11, 2014 at 1:13:11 PM, MCGRATH, GIL (gm2...@att.com) wrote: > # ovs-dpctl show > system@ovs-system: > lookups: hit:10337061 missed:60169617 lost:0 > flows: 2638 > port 0: ovs-system (internal) > port 1: br-em1 (internal) > port 2: em1 > port 3: em2 > port 4: br-em2 (internal) > port 5: br-em4-pri (internal) > port 6: em4 > port 7: br-em4 (internal) > port 8: em3 > port 9: br-em3 (internal) > port 10: vnet0 > > > > ―-Gil > > > On 8/11/14, 4:11 PM, "Justin Pettit" wrote: > > >I asked about "ovs-dpctl dump-flows". Also, please include the output of > >"ovs-dpctl show". > > > >--Justin > > > > > >On August 11, 2014 at 11:03:42 AM, MCGRATH, GIL (gm2...@att.com) wrote: > >> Justin, > >> > >> While is in process of PXE booting. > >> > >> # ovs-ofctl dump-flows br-em1 > >> NXST_FLOW reply (xid=0x4): > >> cookie=0x0, duration=13577.846s, table=0, n_packets=11120087, > >> n_bytes=927952497, idle_age=4, priority=0 actions=NORMAL > >> > >> I ran it multiple time during the PXE boot - the same result except > >> idle_age changed 0-4 and duration changed. > >> > >> Gil > >> > >> > >> > >> > >> On 8/11/14, 1:49 PM, "Justin Pettit" wrote: > >> > >> >What about "ovs-dpctl dump-flows" while the reply is going through. The > >> >flow will only be there for a second or two, so you'll need to be > >> >somewhat fast. > >> > > >> >--Justin > >> > > >> > > >> >On August 11, 2014 at 10:29:38 AM, MCGRATH, GIL (gm2...@att.com) wrote: > >> >> Justin, > >> >> > >> >> Flow is as follows: > >> >> > >> >> # ovs-ofctl dump-flows br-em1 > >> >> NXST_FLOW reply (xid=0x4): > >> >> cookie=0x0, duration=11605.818s, table=0, n_packets=9506767, > >> >> n_bytes=793634428, idle_age=1, priority=0 actions=NORMAL > >> >> > >> >> > >> >> > >> >> On 8/11/14, 1:26 PM, "Justin Pettit" wrote: > >> >> > >> >> >On August 11, 2014 at 10:21:05 AM, MCGRATH, GIL (gm2...@att.com) > >>wrote: > >> >> >> > I am running KVM on ubuntu 14.04. I am trying to PXE boot a VM. > >> >>When > >> >> >> I try this, using tcpdump I see the DHCP Reply message on the > >>³em1² > >> >> >> interface. But I do not see the DHCP Reply on the ³vnet0² > >>interface > >> >> >> that KVM creates on the ³br-em1² bridge. Therefore my PXE times > >> >> >> out. Anyone ever see this? If so, do we know what the issue may > >>be. > >> >> > > >> >> >What does your flow table look like from "ovs-ofctl dump-flows > >>br-em1"? > >> >> >While the replies are coming in, what do you see from "ovs-dpctl > >> >> >dump-flows"? > >> >> > > >> >> >--Justin > >> >> > > >> >> > > >> >> > > >> >> > >> >> > >> > > >> > >> > > > > _______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss
