Hi all,
I'm trying to setup ovs as an ethernet tunnel, so I can dial into a private
network across the Internet.
I have 2 linux hosts A, B, both running openvswitch 2.1.2, configured with
kernel support. Host A is the host which I can dial directly into the
private network. Host A has two network adapters, eth0 & eth1, eth0 is
connected to internet, eth1 is connected to the PPPoE server. ovs setup on
host A is like this:
Bridge "lan0"
Port "eth1"
Interface "eth1"
Port "lan0"
Interface "lan0"
type: internal
Port "vxlan0"
Interface "vxlan0"
type: vxlan
options: {remote_ip="host B"}
ovs setup on host B is like this:
Bridge "lan0"
Port "lan0"
Interface "lan0"
type: internal
Port "vxlan0"
Interface "vxlan0"
type: vxlan
options: {remote_ip="host A"}
With this setup, if I assign a static IP address on both "lan0" interfaces,
both A & B can ping each other, so the vxlan tunnel probably works as
expected.
I also managed to dial into private network through interface lan0 on host
A, I cannot dial into the network through interface lan0 on host B.
Which part of my setup is wrong ? or openvswitch isn't designed to do what
I required ?
Thanks
_______________________________________________
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
