On Fri, Jun 13, 2014 at 04:01:35PM -0700, Lavanya M.K wrote: > Hi, > > I am trying to create two VLANs on mininet using openvswitches. The > topology is as follows: I first created two subnets to mimic two VLANs. I > did this by configuring the ip addresses of hosts as below: > > vlan1 connected to switch 1: > host 1: 10.0.0.1/29 > host 2: 10.0.0.2/29 > > vlan2 connected to switch 2: > host 3 : 10.0.0.9/29 > host4 : 10.0.0.10/29 > > switch 1 and switch 2 are connected to each other. > > Now when i ping h1 to h2, it succeeds which h1 to h3 fails as expected. I > added flow rules to make the vlan work. Flow rule eg: for switch one, the > flow rule tags packets from port 1 and 2 with vlad_id 10 and strips any tag > from packet from port 3 and performs output=normal. > Similar flow rule for switch 2(vlan_id=20) > Now ping fails between h1 and h2 and also between h3 and h4. > Kindly guide me how to make vlan working with openvswitch.
Sorry, I didn't get what exactly the rules are doing. Could you please provide the exact commands you're using to add the flows? Also, how are you checking for the port numbers? fbl _______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss
