This is sending me crazy.  I thought if the bridge did not have any trunks 
assigned then everything would be untagged and passed though.  I have tried 
adding trunk 10 (server network) to ovsbr0 and that has made no difference.  
Here is the current show:

 ovs-vsctl show
76d53621-7bf2-4af2-b24c-181a016317d7
    Bridge "ovsbr0"
        Port "ovsbr0"
            Interface "ovsbr0"
                type: internal
        Port "eth0"
            Interface "eth0"
        Port "vnet3"
            trunks: [20]
            Interface "vnet3"
        Port "vnet0"
            trunks: [0, 10]
            Interface "vnet0"
        Port "vnet2"
            trunks: [0, 10]
            Interface "vnet2"
        Port "vnet1"
            trunks: [20]
            Interface "vnet1"
    ovs_version: "1.10.2"

Any help would be gratefully appreciated.


----- Original Message -----
From: "Phil Daws" <ux...@splatnix.net>
To: discuss@openvswitch.org
Sent: Thursday, 12 December, 2013 12:48:29 PM
Subject: Re: [ovs-discuss] VLAN unable to ping

Still cannot get this to work :( ping between the guests works absolutely fine 
on both VLANs, but no connectivity to the outside would or neither the host 
being able to ping the guests.
----- Original Message -----
From: "Phil Daws" <ux...@splatnix.net>
To: "Ben Pfaff" <b...@nicira.com>
Cc: discuss@openvswitch.org
Sent: Tuesday, 10 December, 2013 10:00:04 AM
Subject: Re: [ovs-discuss] VLAN unable to ping

----- Original Message -----
From: "Ben Pfaff" <b...@nicira.com>
To: "Phil Daws" <ux...@splatnix.net>
Cc: discuss@openvswitch.org
Sent: Sunday, 8 December, 2013 3:57:26 PM
Subject: Re: [ovs-discuss] VLAN unable to ping

On Sun, Dec 08, 2013 at 03:55:39PM +0000, Phil Daws wrote:
> Ben, my apologies! I meant vnet1 and vnet3 which are trunked on tag id 2.
> 
> ovs-vsctl show
> 76d53621-7bf2-4af2-b24c-181a016317d7
>     Bridge "ovsbr0"
>         Port "vnet1"
>             trunks: [2]
>             Interface "vnet1"
>         Port "ovsbr0"
>             Interface "ovsbr0"
>                 type: internal
>         Port "vnet3"
>             trunks: [2]
>             Interface "vnet3"
>         Port "eth0"
>             Interface "eth0"
>         Port "vnet0"
>             trunks: [0, 1]
>             Interface "vnet0"
>         Port "vnet2"
>             trunks: [0, 1]
>             Interface "vnet2"
>     ovs_version: "1.10.2"

Did you configure the guest to use VLAN tag 2?  I didn't see any
configuration for that in your "ifconfig" output.
------------

getting a little further with this now.  The guests are both able to ping each 
other on their 192.168.1.X address as-well as the SAN 10.0.0.X one.  What they 
are unable to do is reach the outside world even though the default GW of 
192.168.1.1 has been set.  The host is also unable to ping the guests 
192.168.1.X addresses even though it itself has a an address within the same 
range.  Here is what I see:

uxbod-office sbin # ovs-vsctl show
76d53621-7bf2-4af2-b24c-181a016317d7
    Bridge "ovsbr0"
        Port "vnet3"
            trunks: [20]
            Interface "vnet3"
        Port "vnet2"
            trunks: [0, 10]
            Interface "vnet2"
        Port "ovsbr0"
            Interface "ovsbr0"
                type: internal
        Port "eth0"
            Interface "eth0"
        Port "vnet1"
            trunks: [20]
            Interface "vnet1"
        Port "vnet0"
            trunks: [0, 10]
            Interface "vnet0"
    ovs_version: "1.10.2"

vnet0 = 192.168.1.56
vnet1 = 10.0.0.10
vnet2 = 192.168.1.90
vnet3 = 10.0.0.20

the physical nic and the bridge have no trunks or tags applied so I thought 
that they would pass all traffic to the guests:

uxbod-office sbin # ovs-vsctl list port ovsbr0
_uuid               : 22601276-6040-4c57-a01e-b856e16e09c8
bond_downdelay      : 0
bond_fake_iface     : false
bond_mode           : []
bond_updelay        : 0
external_ids        : {}
fake_bridge         : false
interfaces          : [d38d649a-e529-4b69-81b3-e3c04de4923e]
lacp                : []
mac                 : []
name                : "ovsbr0"
other_config        : {}
qos                 : []
statistics          : {}
status              : {}
tag                 : []
trunks              : []
vlan_mode           : []
uxbod-office sbin # ovs-vsctl list port eth0
_uuid               : 39d344bb-8db5-4695-9817-28a0906ec0be
bond_downdelay      : 0
bond_fake_iface     : false
bond_mode           : []
bond_updelay        : 0
external_ids        : {}
fake_bridge         : false
interfaces          : [07ae5c32-5b0c-4b65-a6d1-8570d43d3ac6]
lacp                : []
mac                 : []
name                : "eth0"
other_config        : {}
qos                 : []
statistics          : {}
status              : {}
tag                 : []
trunks              : []
vlan_mode           : []

any thoughts please ? Thank you.
_______________________________________________
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
_______________________________________________
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
_______________________________________________
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss

Reply via email to