On Thu, Nov 14, 2013 at 07:15:30PM +0800, chen zhang wrote:
>     I'm configuring mirror on ovs-1.11.0,the FAQ says that "When a packet
> arrives on a VLAN that is used as a mirror output VLAN, the mirror is
> disregarded. Instead, in standalone mode, OVS floods the packet across all
> the ports for which the mirror output VLAN is configured".Does it mean that
> if I configure just as
> 
> ovs-vsctl add-br br0
>        ovs-vsctl add-port br0 eth1 tag=1
> 
>        ovs-vectl add-port br0 eth2 tag=1
>        ovs-vsctl add-port br0 eth3 tag=3
>        ovs-vsctl  -- --id=@m create mirror name=m0 select-all=true
> select-vlan=1 output-vlan=15 -- set bridge br0 mirrors=@m
> 
> then the pkts arriving at eth3 will be flooded to vlan1?

No.  eth3 is an access port for VLAN 3, which is not a mirror output VLAN.

> When I "tcpdump -i eth1"??i find no pkts from eth3.

This should not be a surprise.  eth3 is an access port for VLAN 3, which
is not a mirror selection VLAN.
_______________________________________________
discuss mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/discuss

Reply via email to