Hi Ben, Are you saying that VLAN splinters not apply on Virtual network interfaces ? Then how to make Vlan work on virtual network like ovsbr0.4093 ?
Thanks On Thu, Nov 7, 2013 at 11:37 AM, Ben Pfaff <b...@nicira.com> wrote: > Your first message specifies the wrong command, you have to apply the > splinter to the physical port but you applied it to ovsbr0. > > On Thu, Nov 07, 2013 at 11:30:00AM +0530, Linux user wrote: > > Hi Ben, > > > > Done like : > > other-config:enable-vlan-splinters=true > > > > But its not work out (please see my starting mail thread) ..... > > > > Thanks > > > > > > On Thu, Nov 7, 2013 at 11:27 AM, Ben Pfaff <b...@nicira.com> wrote: > > > > > On Thu, Nov 07, 2013 at 11:24:21AM +0530, Linux user wrote: > > > > Hi Ben, > > > > > > > > Thanks for this info, but I already know that ... > > > > > > > > My problem is that, Every time when system reboot then i use the > command > > > > like: > > > > vs-vsctl set interface eth0 > other-config:enable-vlan-splinters=true > > > > > > > > I want to integrate this command into network scripts > > > > files(/etc/sysconfig/network-scripts/ifcfg-*) > > > > > > > > Just like, I have network configuration like below: > > > > [root@linux]# ovs-vsctl show > > > > f95289de-40e2-4bf5-9f07- > > > > 3c8300e296db > > > > Bridge "ovsbr0" > > > > Port "eth0" > > > > Interface "eth0" > > > > Port "ovsbr0" > > > > Interface "ovsbr0" > > > > type: internal > > > > Port "ovsbr0.4093" > > > > tag: 4093 > > > > Interface "ovsbr0.4093" > > > > type: internal > > > > ovs_version: "1.4.6" > > > > > > > > [root@linux]# lsmod | grep openvswitch > > > > openvswitch 37890 1 > > > > > > > > > > > > So how to integrate VLAN splinters command into network scripts file > > > here ? > > > > > > Why not just add that ovs-vsctl command to your network scripts file? > > > >
_______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss
