HI, actually I have tried this and there is no luck. the flow insertion succeeds while the matching fails. Thanks anyway.
On Sat, Sep 21, 2013 at 9:46 PM, NS Srinivasa Murthy-B37840 < b37...@freescale.com> wrote: > ** ** > > Hi,**** > > ** ** > > When IP Addresses are to be specified as match fields, it is a pre > requisite to include the match field OFPXMT_OFB_ETH_TYPE with a value of > 0x800 (IP Protocol.)**** > > ** ** > > Thanks**** > > -ns murthy**** > > ** ** > > *From:* discuss-boun...@openvswitch.org [mailto: > discuss-boun...@openvswitch.org] *On Behalf Of *Feixiong Zhang > *Sent:* Sunday, September 22, 2013 6:46 AM > *To:* discuss@openvswitch.org > *Subject:* [ovs-discuss] flow table question**** > > ** ** > > Hi, all > > I am trying to insert two flows in table0 and table 1 separately. The > first flow entry tries to pop the MPLS header and the second entry will > match the rest of the packet, like dl_src,dl_dst, nw_src ... fields. The > following are my flows: > > table0: > priority=0,mpls,in_port=2,**** > > mpls_label=3 > ,actions=pop_mpls:0x0800,load:0xe->OXM_OF_METADATA[],resubmit(,1) > > table1: > priority=32786,tcp,metadata=0xe,in_port=2,dl_src=90:e2:ba:3d:c0:f8,dl_dst=90:e2:ba:28:e6:98,nw_src=10.0.3.4,nw_dst=10.0.1.4 > actions=output:3 > > But the matching will fail if nw_src and nw_dst field are set in the > table1 flow rule, while there is no problem if only ethernet header is set. > Does anyone have any idea about what's going on here. I would appreciate > your help a lot. Thanks.**** >
_______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss
