Foget that, I have resolved it, but another question happened: when I use
ovs-vsctl create ovsbr0,
[root@Mic ovs]# ovs-vsctl show
0a6f41ed-415a-4868-a41a-592145adb1c7
Bridge "ovsbr0"
Port "ovsbr0"
Interface "ovsbr0"
type: internal
and then I want to use this network by virsh, error happens as below:
[root@Mic ovs]# virsh net-define /etc/libvirt/qemu/networks/ovs_nat.xml
Network ovs_nat defined from /etc/libvirt/qemu/networks/ovs_nat.xml
[root@Mic ovs]# virsh net-create /etc/libvirt/qemu/networks/ovs_nat.xml
error: Failed to create network from /etc/libvirt/qemu/networks/ovs_nat.xml
error: internal error Network is already in use by interface ovsbr0
The content of ovs_nat.xml is:
<!--
WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE
OVERWRITTEN AND LOST. Changes to this xml configuration should be made
using:
virsh net-edit ovs_nat
or other application using the libvirt API.
-->
<network>
<name>ovs_nat</name>
<uuid>0a6f41ed-415a-4868-a41a-592145adb1c7</uuid>
<forward mode='nat'/>
<bridge name='ovsbr0' stp='on' delay='0' />
<ip address='192.168.100.1' netmask='255.255.255.0'>
<dhcp>
<range start='192.168.100.2' end='192.168.100.254' />
</dhcp>
</ip>
<virtualport type='openvswitch'/>
</network>
Hope your response. Thanks a lot.
On Fri, Sep 6, 2013 at 3:12 PM, Fuhui Li <gdbless...@gmail.com> wrote:
> Hi ovs members, I got this issue below, may you give me some tips to
> resolve this ?
> Thanks a lot.
>
> [root@Mic ~]# ovs-vswitchd --pidfile --detach
> 2013-09-06T06:51:55Z|00001|reconnect|INFO|unix:/usr/local/var/run/openvswitch/db.sock:
> connecting...
> 2013-09-06T06:51:55Z|00002|reconnect|INFO|unix:/usr/local/var/run/openvswitch/db.sock:
> connected
> 2013-09-06T06:51:55Z|00003|ovsdb_idl|WARN|syntax "{"details":"ipfix is not
> a valid column name","error":"syntax
> error","syntax":"[\"controller\",\"datapath_id\",\"datapath_type\",\"fail_mode\",\"flood_vlans\",\"flow_tables\",\"ipfix\",\"mirrors\",\"name\",\"netflow\",\"other_config\",\"ports\",\"protocols\",\"sflow\",\"status\",\"stp_enable\"]"}":
> syntax error: <table-updates> includes unknown table "error"
>
> my env:
> [root@Mic ovs]# uname -r
> 2.6.32-131.0.15.el6.x86_64
> [root@Mic ovs]# cat /etc/redhat-release
> Red Hat Enterprise Linux Server release 6.1 (Santiago)
> [root@Mic ovs]# libvirtd -v
> 2013-09-06 07:04:25.316+0000: 3484: info : libvirt version: 0.10.2
> [root@Mic ovs]# ovs-vsctl --version
> ovs-vsctl (Open vSwitch) 2.0.90
> Compiled Sep 5 2013 16:24:36
>
>
>
_______________________________________________
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
