do i need to add route for br1 as per above example, because in my route table gateway is 0.0.0.0 for both bridges.
On Fri, Aug 2, 2013 at 10:41 AM, Alex Wang <al...@nicira.com> wrote: > Hey Prashant, > > I just repeated your configuration on two machines. And it works. > > My ovs is the master branch from here: > http://git.openvswitch.org/cgi-bin/gitweb.cgi?p=openvswitch;a=summary > > """ > # eth1 on two machines are directly connected > # eth1 on machine1 has address 2.2.2.2 > # eth1 on machine2 has address 2.2.2.3 > # Below is the script on machine1: > vs-vsctl add-br br0 -- add-port br0 eth1 > sudo ifconfig br0 2.2.2.2 netmask 255.255.255.0 > sudo ifconfig eth1 0 up > ovs-vsctl add-br br1 > sudo ifconfig br1 11.11.11.25 netmask 255.255.255.0 > ovs-vsctl add-port br1 gre0 -- set interface gre0 type=gre > options:remote_ip=2.2.2.2 > """ > Is this the same as yours? If it is, seems to be caused by other misconfig. > And you may need to use commands like tcpdump, ovs-dpctl dump-flows, route > for debugging. > You may refer to this thread for ways of debugging: > http://openvswitch.org/pipermail/discuss/2013-July/010440.html > > Kind Regards, > Alex Wang, > -- Thanks &Regards, Prashant Chougule.
_______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss
