Thanks Kyle. I guess i was not following the instructions in the INSTALL file correctly. It is working now, thanks for the help.
On Tue, Jul 30, 2013 at 2:43 PM, Kyle Mestery (kmestery) <kmest...@cisco.com > wrote: > On Jul 30, 2013, at 6:43 AM, Shahryar Ali <shahryara...@gmail.com> wrote: > > > > Thanks for the reply Kyle. Here is the output of the modinfo openvswitch: > > > > # modinfo openvswitch > > filename: > /lib/modules/3.8.0-27-generic/kernel/net/openvswitch/openvswitch.ko > > license: GPL > > description: Open vSwitch switching datapath > > srcversion: 15C32AD9E04F379CAC3D68E > > depends: > > intree: Y > > vermagic: 3.8.0-27-generic SMP mod_unload modversions > > > > So how can i run the ovs kernel module in Open Vswitch? > > > You can follow the instructions in the INSTALL file at the top-level of > the OVS source tree to build and install the kernel module. > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > discuss mailing list > > > > > discuss at openvswitch.org > > > http://openvswitch.org/mailman/listinfo/discuss > > > > > > On Sun, Jul 28, 2013 at 3:03 AM, Kyle Mestery (kmestery) < > kmest...@cisco.com> wrote: > > On Jul 27, 2013, at 6:35 AM, Shahryar Ali <shahryara...@gmail.com> > wrote: > > > Hi i am newbie in Openvswitch and trying to create a VXLAN tunnel. I > am having issue in connectivity. I am not able to ping the isolated bridges > through VXLAN tunnel. The tunnel end points do have the connectivity. Here > is my configuration: > > > > > > Host 1: > > > > > > Bridge "br0" > > > Port "br0" > > > Interface "br0" > > > type: internal > > > Port "eth0" > > > Interface "eth0" > > > Bridge "br1" > > > Port "vxlan1" > > > Interface "vxlan1" > > > type: vxlan > > > options: {key=flow, remote_ip="192.168.1.102"} > > > Port "br1" > > > Interface "br1" > > > type: internal > > > > > > root@shahryar-VirtualBox:~# ifconfig > > > br0 Link encap:Ethernet HWaddr 08:00:27:44:9b:8b > > > inet addr:192.168.1.101 Bcast:192.168.1.255 > Mask:255.255.255.0 > > > inet6 addr: fe80::7cda:c4ff:fe22:880a/64 Scope:Link > > > UP BROADCAST RUNNING MTU:1500 Metric:1 > > > RX packets:318 errors:0 dropped:0 overruns:0 frame:0 > > > TX packets:31 errors:0 dropped:0 overruns:0 carrier:0 > > > collisions:0 txqueuelen:0 > > > RX bytes:54076 (54.0 KB) TX bytes:2358 (2.3 KB) > > > > > > br1 Link encap:Ethernet HWaddr 16:0a:50:e6:5c:4c > > > inet addr:192.168.2.1 Bcast:192.168.2.255 > Mask:255.255.255.0 > > > inet6 addr: fe80::4068:38ff:feeb:65bd/64 Scope:Link > > > UP BROADCAST RUNNING MTU:1500 Metric:1 > > > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > > > TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 > > > collisions:0 txqueuelen:0 > > > RX bytes:0 (0.0 B) TX bytes:468 (468.0 B) > > > > > > eth0 Link encap:Ethernet HWaddr 08:00:27:44:9b:8b > > > inet6 addr: fe80::a00:27ff:fe44:9b8b/64 Scope:Link > > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > > > RX packets:297 errors:0 dropped:0 overruns:0 frame:0 > > > TX packets:452 errors:0 dropped:0 overruns:0 carrier:0 > > > collisions:0 txqueuelen:1000 > > > RX bytes:53173 (53.1 KB) TX bytes:86554 (86.5 KB) > > > > > > lo Link encap:Local Loopback > > > inet addr:127.0.0.1 Mask:255.0.0.0 > > > inet6 addr: ::1/128 Scope:Host > > > UP LOOPBACK RUNNING MTU:65536 Metric:1 > > > RX packets:1885 errors:0 dropped:0 overruns:0 frame:0 > > > TX packets:1885 errors:0 dropped:0 overruns:0 carrier:0 > > > collisions:0 txqueuelen:0 > > > RX bytes:148186 (148.1 KB) TX bytes:148186 (148.1 KB) > > > > > > > > > root@shahryar-VirtualBox:~# route -n > > > Kernel IP routing table > > > Destination Gateway Genmask Flags Metric Ref > Use Iface > > > 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 > 0 br0 > > > 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 > 0 br0 > > > 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 > 0 br1 > > > > > > > > > Host 2: > > > > > > root@shahryarvm2-VirtualBox:~# ovs-vsctl show > > > 88f16842-6876-4e1d-8607-e097bd2ad435 > > > Bridge "br0" > > > Port "eth0" > > > Interface "eth0" > > > Port "br0" > > > Interface "br0" > > > type: internal > > > Bridge "br1" > > > Port "vxlan1" > > > Interface "vxlan1" > > > type: vxlan > > > options: {key=flow, remote_ip="192.168.1.101"} > > > Port "br1" > > > Interface "br1" > > > type: internal > > > > > > root@shahryarvm2-VirtualBox:~# ifconfig > > > > > > br0 Link encap:Ethernet HWaddr 08:00:27:0f:8d:47 > > > inet addr:192.168.1.102 Bcast:192.168.1.255 > Mask:255.255.255.0 > > > inet6 addr: fe80::2c7d:cbff:fe71:a555/64 Scope:Link > > > UP BROADCAST RUNNING MTU:1500 Metric:1 > > > RX packets:222 errors:0 dropped:0 overruns:0 frame:0 > > > TX packets:38 errors:0 dropped:0 overruns:0 carrier:0 > > > collisions:0 txqueuelen:0 > > > RX bytes:35357 (35.3 KB) TX bytes:2932 (2.9 KB) > > > > > > br1 Link encap:Ethernet HWaddr a6:cc:a0:52:17:4c > > > inet addr:192.168.2.2 Bcast:192.168.2.255 > Mask:255.255.255.0 > > > inet6 addr: fe80::f425:39ff:fe31:15d8/64 Scope:Link > > > UP BROADCAST RUNNING MTU:1500 Metric:1 > > > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > > > TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 > > > collisions:0 txqueuelen:0 > > > RX bytes:0 (0.0 B) TX bytes:468 (468.0 B) > > > > > > eth0 Link encap:Ethernet HWaddr 08:00:27:0f:8d:47 > > > inet6 addr: fe80::a00:27ff:fe0f:8d47/64 Scope:Link > > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > > > RX packets:285 errors:0 dropped:0 overruns:0 frame:0 > > > TX packets:397 errors:0 dropped:0 overruns:0 carrier:0 > > > collisions:0 txqueuelen:1000 > > > RX bytes:54697 (54.6 KB) TX bytes:61879 (61.8 KB) > > > > > > lo Link encap:Local Loopback > > > inet addr:127.0.0.1 Mask:255.0.0.0 > > > inet6 addr: ::1/128 Scope:Host > > > UP LOOPBACK RUNNING MTU:65536 Metric:1 > > > RX packets:1902 errors:0 dropped:0 overruns:0 frame:0 > > > TX packets:1902 errors:0 dropped:0 overruns:0 carrier:0 > > > collisions:0 txqueuelen:0 > > > RX bytes:147656 (147.6 KB) TX bytes:147656 (147.6 KB) > > > > > > root@shahryarvm2-VirtualBox:~# route -n > > > Kernel IP routing table > > > Destination Gateway Genmask Flags Metric Ref > Use Iface > > > 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 > 0 br0 > > > 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 > 0 br0 > > > 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 > 0 br1 > > > > > > > > > Interestingly, the VXLAN is not showing up as port in ovs-dpctl show > output: > > > > > > root@shahryarvm2-VirtualBox:~# ovs-dpctl show > > > system@ovs-system: > > > lookups: hit:70 missed:36 lost:0 > > > flows: 2 > > > port 0: ovs-system (internal) > > > port 1: br0 (internal) > > > port 2: eth0 > > > port 3: tep0 (internal) > > > port 4: br1 (internal) > > > > > > And i got the following message in the logs: > > > > > > 2013-07-26T18:11:02Z|00011|dpif|WARN|system@ovs-system: failed to add > vxlan1 as port: Address family not supported by protocol > > > > > > What does it mean by address family not supported by protocol? .It > seems that VXLAN is not working at all. I know i am missing some important > part of the configuration. Could somebody please help me. Thanks! > > > > > You are likely not running the OVS kernel module included with upstream > Open vSwitch, and instead are running the OVS kernel module in upstream > Linux. What does "modinfo openvswitch" indicate? It should indicate the > matching version of your OVS userspace bits (1.10 and later for VXLAN > support). > > > > Thanks, > > Kyle > > > > > > > > > > > > > > _______________________________________________ > > > discuss mailing list > > > discuss@openvswitch.org > > > http://openvswitch.org/mailman/listinfo/discuss > > > > > > > > >
_______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss
