On Tue, May 14, 2013 at 09:29:15AM -0700, Jesse Gross wrote: > On Tue, May 14, 2013 at 2:57 AM, Christopher Paggen (cpaggen) > <[email protected]> wrote: > > Hello, > > > > > > > > I’m wondering if/how I can establish a relation between an OVS interface > > (such as vnet0) and its port number as used in openflow entries? > > > > Everything is working fine, I’m just trying to better understand how the > > various components work together. > > > > > > > > For example: > > > > > > > > root@qemu-kvm:/# ovs-vsctl -V > > > > ovs-vsctl (Open vSwitch) 1.11.90 > > > > Compiled May 8 2013 11:11:41 > > > > root@qemu-kvm:/# > > > > root@qemu-kvm:/# ovs-ofctl dump-ports-desc br0 > > > > OFPST_PORT_DESC reply (xid=0x2): > > > > 1(eth1): addr:00:50:56:a5:50:44 > > > > config: 0 > > > > state: 0 > > > > current: 1GB-FD COPPER AUTO_NEG > > > > advertised: 10MB-HD 10MB-FD 100MB-HD 100MB-FD 1GB-FD COPPER AUTO_NEG > > > > supported: 10MB-HD 10MB-FD 100MB-HD 100MB-FD 1GB-FD COPPER AUTO_NEG > > > > speed: 1000 Mbps now, 1000 Mbps max > > > > 5(vnet0): addr:fe:54:00:a5:77:73 > > > > config: 0 > > > > state: 0 > > > > current: 10MB-FD COPPER > > > > speed: 10 Mbps now, 0 Mbps max > > > > 6(vnet1): addr:fe:54:00:6b:64:ed > > > > config: 0 > > > > state: 0 > > > > current: 10MB-FD COPPER > > > > speed: 10 Mbps now, 0 Mbps max > > > > LOCAL(br0): addr:00:50:56:a5:50:44 > > > > config: 0 > > > > state: 0 > > > > speed: 0 Mbps now, 0 Mbps max > > > > > > > > è Vnet0 appears to have port id 5 while vnet1 has port id 6. Now if I check > > the fdb on br0 I get different port numbers: > > > > > > > > root@qemu-kvm:/# ovs-appctl fdb/show br0 > > > > port VLAN MAC Age > > > > 2 0 00:18:74:c2:40:00 151 > > > > 2 0 00:50:56:a5:28:9c 66 > > > > 3 0 52:54:00:a5:77:73 1 > > > > 4 0 52:54:00:6b:64:ed 1 > > > > root@qemu-kvm:/# > > > > > > > > Flow entries match numbering found in the fdb: > > > > > > > > root@qemu-kvm:/# ovs-ofctl dump-flows br0 > > > > NXST_FLOW reply (xid=0x4): > > > > cookie=0x0, duration=10877.038s, table=0, n_packets=7649, n_bytes=3550080, > > idle_age=1, priority=0 actions=NORMAL > > > > root@qemu-kvm:/# ovs-appctl dpif/dump-flows br0 > > > > in_port(4),eth(src=52:54:00:6b:64:ed,dst=52:54:00:a5:77:73),eth_type(0x0800),ipv4(src=7.7.7.57,dst=7.7.7.56,proto=6,tos=0x10,ttl=64,frag=no),tcp(src=32770,dst=22), > > packets:1458, bytes:97428, used:0.536s, flags:P., actions:3 > > > > in_port(3),eth(src=52:54:00:a5:77:73,dst=52:54:00:6b:64:ed),eth_type(0x0800),ipv4(src=7.7.7.56,dst=7.7.7.57,proto=6,tos=0x10,ttl=64,frag=no),tcp(src=22,dst=32770), > > packets:1474, bytes:1128004, used:0.536s, flags:P., actions:4 > > > > root@qemu-kvm:/# > > > > > > > > è Here I see ports 3 and 4 in use (they match the previous fdb output) for > > vnet0 and vnet1 > > > > > > > > How come the numbers don’t match? Now I noticed that only table Interfaces > > has an ofport tuple, while table Port doesn’t. Am I mixing interfaces and > > ports? > > All of these port numbers should be the same, so something strange is > going on. I'm assuming that you double checked that nothing changed > between running those commands? The other place would be useful to > look is in the database, in the interface table. That should also list > the OpenFlow port number. > > It looks like you are running master and, while I would be some > surprised if a bug like this went unnoticed, there were a number of > changes in this area for 1.10. Assuming that you can reproduce this > consistently, it might be worth trying an older version to see if it > persists.
It looks like we have a bug in fdb/show: it's showing the ODP port number but the OpenFlow port number would be more useful to users. _______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
