On Mon, Apr 29, 2013 at 09:55:44AM +0530, Prashant Chougule wrote: > I have small set-up of n/w with ovs running machine running with 4 > ports,like gbe1,gbe2 and gbe3 > > gbe1 is bridge port and gbe2 and gbe3 are the ports under that, the n/w is > isolated but without adding any flow in the flow table it will show me 1 > active flow after ping request, > > NXST_FLOW reply (xid=0x4): > > cookie=0x0, duration=3657.241s, table=0, n_packets=6652, n_bytes=754944, > idle_age=0, priority=0 actions=NORMAL, > > How ?
That's the default behavior. If you want there to be no flows at all, use secure mode. > And in my n/w I have connected two hosts to gbe2 and gbe3 with some static > I/p, I check with ping request with 6 pkts its working fine but if I check "I/p"? Do you mean IP addresses? > the dump-ports it will show me pkts more than that on that particular port, > it suppose to show 6 pkts in tx field and 6 pkts in rx field of other port. > > ./ovs-ofctl dump-ports br0 > > OFPST_PORT reply (xid=0x2): 4 ports > > port 3: rx pkts=8524, bytes=626619, drop=0, errs=0, frame=0, over=0, crc=0 > > tx pkts=3080, bytes=696653, drop=0, errs=0, coll=0 (gbe3) > > port 2: rx pkts=1680, bytes=148306, drop=0, errs=0, frame=0, over=0, crc=0 > > tx pkts=6257, bytes=705885, drop=0, errs=0, coll=0 (gbe2) > > what is that other pkts other than ICMP ? We have no way to know. These statistics are the same ones that "ifconfig" reports. _______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss
