Open vSwitch doesn't have any built-in integration with libvirt, but on the other hand libvirt does have some support for Open vSwitch, so perhaps you should try inquiring on a libvirt mailing list.
Also, version 1.4.0 is four minor versions behind, seeing as we just released 1.4.4. You might try a new version. On Fri, Jan 18, 2013 at 07:22:30PM -0200, Martinx - ジェームズ wrote: > Hi! > > Also, I just tried this: > > ifdown ovsbr0p1 > ifdown eth0 > > ovs-vsctl del-port ovsbr0p1 > ovs-vsctl del-br ovsbr0 > ovs-vsctl show (empty / clean) > > ovs-vsctl add-br br0 > ovs-vsctl add-port br0 eth0 > ovs-vsctl list-br > > New /etc/network/interfaces: > > ------ > # The primary network interface > auto eth0 > iface eth0 inet static > address 10.32.14.2 > netmask 24 > # gateway 10.32.14.1 > > auto br0 > iface br0 inet manual > up ifconfig $IFACE 0.0.0.0 up > down ifconfig $IFACE down > ------ > > And now I can select the bridge (br0) on virt-manager but, same error when > I try to start it: > > "Unable to complete install: 'Unable to add bridge br0 port vnet0: > Operation not supported'" > > I just read this: > http://blog.allanglesit.com/2012/03/linux-kvm-ubuntu-12-04-with-openvswitch/- > since I'm using Ubuntu 12.04 but, no difference, same error... > > I really appreciate ANY help from you guys! > > Thanks! > Thiago > > On 18 January 2013 18:40, Martinx - ジェームズ <thiagocmarti...@gmail.com> wrote: > > > Hi! > > > > I'm trying Open vSwitch after much delay... Can't use brctl anymore... > > =P > > > > I have Ubuntu 12.04 64 bits, Open vSwitch 1.4.0+build0, with Ubuntu > > Cloud Archives <https://wiki.ubuntu.com/ServerTeam/CloudArchive>repository > > enabled... Which provides libvirt 0.9.13 for Ubuntu 12.04 LTS. > > > > What I'm doing? > > > > ovs-vsctl add-br ovsbr0 > > ovs-vsctl add-port ovsbr0 eth0 > > ovs-vsctl add-port ovsbr0 ovsbr0p1 -- set interface ovsbr0p1 type=internal > > > > My /etc/network/interfaces have: > > --- > > # The primary network interface > > auto eth0 > > iface eth0 inet manual > > up ifconfig $IFACE 0.0.0.0 up > > down ifconfig $IFACE down > > > > auto ovsbr0p1 > > iface ovsbr0p1 inet static > > address 10.32.14.2 > > netmask 24 > > --- > > > > But when open virt-manager, I can't select the ovsbr0p1 (or ovsbr0)... > > They are "unselectable" (gray)... > > > > What am I missing? > > > > I followed this guide to help me: > > http://blog.allanglesit.com/2012/10/linux-kvm-ubuntu-12-10-with-openvswitch/ > > > > When I tried to manually select the ovsbr0 or ovsbr0p1, virt-manager > > returns: > > > > ------ > > Traceback (most recent call last): > > File “/usr/share/virt-manager/virtManager/asyncjob.py”, line 45, in > > cb_wrapper > > callback(asyncjob, *args, **kwargs) > > File “/usr/share/virt-manager/virtManager/create.py”, line 1909, in > > do_install > > guest.start_install(False, meter=meter) > > File “/usr/lib/python2.7/dist-packages/virtinst/Guest.py”, line 1236, in > > start_install > > noboot) > > File “/usr/lib/python2.7/dist-packages/virtinst/Guest.py”, line 1304, in > > _create_guest > > dom = self.conn.createLinux(start_xml or final_xml, 0) > > File “/usr/lib/python2.7/dist-packages/libvirt.py”, line 2501, in > > createLinux > > if ret is None:raise libvirtError(‘virDomainCreateLinux() failed’, > > conn=self) > > libvirtError: Unable to add bridge ovsbr0p1 port vnet0: Operation not > > supported > > ------ > > > > I do not have openvswitch-brcompat installed. And I don't think I need it. > > > > Thanks! > > Thiago > > > _______________________________________________ > discuss mailing list > discuss@openvswitch.org > http://openvswitch.org/mailman/listinfo/discuss _______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss
