Hi,
I wanted to play around with VLAN so I created 3 VM's
(running kvm on Ubuntu 12.04 with the openvswitch 1.7.0).
Two of them was in VLAN 10. It worked nice. They could talk to
each other but not to the third VM which was in (the default?) VLAN 0.
However, to make external IP traffic possible I had to add my (only)
pyshical device (eth0) to VLAN 10. Fine, now external access worked
from the two VM's.
But, now I couldn't access the outside from within my host machine.
(I was able to restore it by removing eth0 from VLAN 10 and
attach it to VLAN0 again...)
So, my question is, how I could solve this so that it works for
both my host machine as well as those VLAN-guest VMs?
I attach some info below in case that would be helpful.
Cheers, Tobbe
# ovs-vsctl show
412279fe-57da-42c5-a2d3-ead66689f6cb
Bridge "br0"
Port "vnet0"
Interface "vnet0"
Port "vnet2"
tag: 10
Interface "vnet2"
Port "vnet1"
tag: 10
Interface "vnet1"
Port "br0"
Interface "br0"
type: internal
Port "eth0"
tag: 0
Interface "eth0"
# ip a ls
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet 169.254.169.254/32 scope link lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast state UP qlen 1000
link/ether d4:be:d9:98:59:7c brd ff:ff:ff:ff:ff:ff
10: br0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc
noqueue state UNKNOWN
link/ether d4:be:d9:98:59:7c brd ff:ff:ff:ff:ff:ff
inet 192.168.1.115/24 brd 192.168.1.255 scope global br0
inet6 fe80::a444:1ff:fe24:fd46/64 scope link
valid_lft forever preferred_lft forever
16: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP qlen 500
link/ether 4a:d9:f8:ed:e5:28 brd ff:ff:ff:ff:ff:ff
inet6 fe80::48d9:f8ff:feed:e528/64 scope link
valid_lft forever preferred_lft forever
18: vnet1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP qlen 500
link/ether ce:3b:44:0d:db:e3 brd ff:ff:ff:ff:ff:ff
inet6 fe80::cc3b:44ff:fe0d:dbe3/64 scope link
valid_lft forever preferred_lft forever
19: vnet2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP qlen 500
link/ether da:72:1a:ed:bf:a7 brd ff:ff:ff:ff:ff:ff
inet6 fe80::d872:1aff:feed:bfa7/64 scope link
valid_lft forever preferred_lft forever
Example, on how I started kvm:
kvm -m 2048 -net nic,vlan=10,model=virtio,macaddr=00:00:00:00:cc:12 -net
tap,vlan=10,ifname=vnet2,script=/etc/ovs-ifup,downscript=/etc/ovs-ifdown
-boot c -hda /var/lib/libvirt/images/debian-6.0.5_boot2-c3.img
_______________________________________________
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
