Hi Ben,

It is happening without the controller removed too ..

$ sudo ovs-vsctl show
add5c761-9075-4f6d-8df2-a23c72062451
    Bridge ovsbr
        Port "tap0"
            Interface "tap0"
        Port "eth1"
            Interface "eth1"
        Port ovsbr
            Interface ovsbr
                type: internal
        Port "ovsbr10"
            tag: 10
            Interface "ovsbr10"
                type: internal
    ovs_version: "1.4.0+build0"

The physical interface is a wireless NIC. I assume that shouldn't have any
bearing on the behaviour.

Thanks,
Srinivas.


On Fri, May 4, 2012 at 12:32 PM, Ben Pfaff <b...@nicira.com> wrote:

> You have a controller connected.  The controller may be overriding the
> default OVS behavior.
>
> On Fri, May 04, 2012 at 12:27:22PM -0700, Srinivasa R Kanduru wrote:
> > Thanks ! Here is the output:
> > $ sudo ovs-vsctl show
> > [sudo] password for cloud:
> > add5c761-9075-4f6d-8df2-a23c72062451
> >     Bridge ovsbr
> >         Controller "tcp:127.0.0.1:6633"
> >             is_connected: true
> >         Port "tap0"
> >             Interface "tap0"
> >         Port "eth1"
> >             Interface "eth1"
> >         Port ovsbr
> >             Interface ovsbr
> >                 type: internal
> >         Port "ovsbr10"
> >             tag: 10
> >             Interface "ovsbr10"
> >                 type: internal
> >     ovs_version: "1.4.0+build0"
> >
> >
> >
> >
> > On Fri, May 4, 2012 at 12:22 PM, Ben Pfaff <b...@nicira.com> wrote:
> >
> > > On Fri, May 04, 2012 at 12:20:52PM -0700, Srinivasa R Kanduru wrote:
> > > > I followed cookbook instructions to connect openvswitch to two VMs
> and to
> > > > the host physical interface.  The tap interfaces of VM and the
> physical
> > > > interface on the host are added to the openvswitch bridge and I am
> able
> > > to
> > > > ping between VMs and from VM to the host. But the packets are not
> going
> > > out
> > > > of the host physical interface.  The host is ubuntu 12.04 and the
> > > > openvswitch version is 1.4.
> > > >
> > > > Is there anything that I am missing ? I can provide any information
> of
> > > the
> > > > configuration but not sure which might be relevent.
> > >
> > > "ovs-vsctl show" output is a good place to start.
>



-- 
     If you want to live fully, leave fully !!

                  - Sri Siva Shankar Baba
_______________________________________________
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss

Reply via email to