Hi,
I am running OFTest on software switch ( OVS) ( OFTest running on
localhost)
I have downloaded OFtest from "git://openflow.org/oftest"
br0 is created and linked with physical interface of switch, ip of br0 is
10.0.1.1 .OVS is in listening mode by using following command:- ovs-vsctl
set-controller br0 tcp:127.0.0.1:6633
I have created 4 veth pairs on same machine by using following commands:-
ip link add type veth
ifconfig veth0 10.0.1.101/22 up
route add -host 10.0.1.102 dev veth0
ifconfig veth1 10.0.1.102/22 up
ifconfig lo up
now repeated above for next 3 veth pairs
I have added ports veth1,veth3,veth5,veth7 to br0 by using following
command:-
ovs-vsctl add-port br0 veth1
ovs-vsctl add-port br0 veth3
ovs-vsctl add-port br0 veth5
ovs-vsctl add-port br0 veth7
[root@localhost openvswitch-1.2.2]# ovs-vsctl show
88cb2707-16da-4c07-982b-f099a5624de6
Bridge "br0"
Controller "tcp:127.0.0.1"
fail_mode: secure
Port "em1"
Interface "em1"
Port "veth7"
Interface "veth7"
Port "veth5"
Interface "veth5"
Port "veth3"
Interface "veth3"
Port "veth1"
Interface "veth1"
Port "br0"
Interface "br0"
type: internal
[root@localhost openvswitch-1.2.2]# ovs-dpctl show
system@br0:
lookups: frags:0, hit:11, missed:154, lost:0
port 0: br0 (internal)
port 1: em1
port 2: veth1
port 3: veth3
port 4: veth5
port 5: veth7
After above all steps,when I am running OFT by following command, it is a
failure
./oft --host=127.0.0.1 --port=6633 --verbose --test-spec=PacketIn
WARNING: No route found for IPv6 destination :: (no default route?)
runTest (basic.PacketIn) ... FAIL
======================================================================
FAIL: runTest (basic.PacketIn)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/root/oftest/tests/basic.py", line 226, in runTest
' for port ' + str(of_port))
AssertionError: Response packet does not match send packet for port 1
----------------------------------------------------------------------
Ran 1 test in 5.073s
FAILED (failures=1)
[root@localhost tests]# ./oft --host=127.0.0.1 --port=6633 --verbose
--test-spec=PacketIn --base-of-port=2
WARNING: No route found for IPv6 destination :: (no default route?)
runTest (basic.PacketIn) ... FAIL
======================================================================
FAIL: runTest (basic.PacketIn)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/root/oftest/tests/basic.py", line 226, in runTest
' for port ' + str(of_port))
AssertionError: Response packet does not match send packet for port 2
----------------------------------------------------------------------
Ran 1 test in 7.480s
FAILED (failures=1)
Please suggest where I am wrong?
Along with that please confirm is remote.py used for “hardware” switches
only? Please confirm the format for local.py configuration for port
mapping, if need.
- Sonny
log.log
Description: Binary data
_______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss
