Hello, I ran in a curious measurement when I looked at sFlowTool and sFlowTrend numbers.
Several counters display 4,294,967,295. These are ifInBroadcastPkts, ifInUnknownProtos, ifOutMulticastPkts, ifOutBroadcastPkts. My setup uses the software at [1] and I start it with [2]. For enabling multicasting I run the following command [0] in each lxc-shell [0] route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0 Is there a possible workaround I can use to reset the sFlow database entries to numbers which are more useable? Looks like this uint(?) was set to -1.. Chris [1]Installed Software: openvswitch-1.4.0, sflowtool-3.25, Ubuntu 11.10 Kernel 3.0.0-12 in VirtualBox, connecting lxc-containers via brctl compatiblity mode. [2]Reproduce via: cd ~/openvswitch-1.4.0 && sudo -s rmmod bridge insmod ./datapath/linux/openvswitch_mod.ko insmod ./datapath/linux/brcompat_mod.ko ovsdb-tool create /usr/local/etc/openvswitch/conf.db vswitchd/vswitch.ovsschema ovsdb-server --remote=punix:/usr/local/var/run/openvswitch/db.sock --remote=db:Open_vSwitch,manager_options --pidfile --detach ovs-vsctl --no-wait init ovs-vswitchd --pidfile --detach ovs-brcompatd --pidfile --detach brctl addbr br0 ovs-vsctl -- --id=@s create sFlow agent=lo target=\"127.0.0.1:6343\" header=128 sampling=64 polling=1 -- set Bridge br0 sflow=@s lxc.conf: > lxc.utsname = one > lxc.network.type = veth > lxc.network.flags = up > lxc.network.link = br0 > lxc.network.ipv4 = 10.0.0.1/24 mkdir /cgroup mount -t cgroup cgroup /cgroup lxc-create -n one -f lxc.conf lxc-start -n /bin/bash sflowtool _______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss
