Le Mardi 27 Mars 2012 15:14 CEST, Maxime JÉGO <maxime.j...@netensia.fr> a écrit: > > Le Mardi 27 Mars 2012 00:35 CEST, Ben Pfaff <b...@nicira.com> a écrit: > > > On Mon, Mar 26, 2012 at 10:00:34AM +0200, Maxime JÉGO wrote: > > > Hello everybody, i have a problem with the interaction between my OVS and > > > my switch. > > > When i want to ping my gateway on my cisco, from my Virtual Machine > > > (VM1), I see on eth1 (interface linked to the switch and to the bridge > > > br0), that i have only the arp request tagged 35, and not the reply... > > > > > > Furthermore, if i add a static entry in arp table on VM1, i can see that > > > the ping request is sent to the cisco, and with a port mirroring on the > > > cisco interface, i see (with tcpdump) the request and the reply without > > > tag.... so, no reply on eth1... > > > Very strange .... I don't understand .. > > > > It sounds like you should configure eth1 in OVS as native-tagged for> VLAN > > 35, e.g.: > > ovs-vsctl set port eth1 vlan_mode=native-tagged tag=35> so that OVS > > will treat untagged packets coming in on eth1 as part > > of VLAN 35. > > > > I have already test it, and it doesn't work ... > > I join a PDF file in attachment with all my configuration test of ovs. (this > is the last configuration that I would like it works.) > > Thank's for your help. > > > Maxime JEGO.
I notice that I have in my captures frames, frames IP Bogus IP length of type (2, Less than header length 24) sent to my VM1 just after sending the ARP request from VM1 What's that frame ? I have see similar subject about this on the list but no response.. Thank's Maxime JEGO _______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss
