The evidence points to a configuration error, since plenty of other users do not see duplicate packets in similar situations. Again I suggest that you read REPORTING-BUGS and provide the information suggested there.
On Wed, Mar 21, 2012 at 01:04:20PM +0800, Jingfei Hu wrote: > Hi, Ben, > In the last few days, I have spent my spare time on figuring out the reason > of ping DUP problem. Here is my result: > The network setting including netmask\default gateway etc. contains no > error. Following is the ip address setting and routing table of the host > and the guest: > -------------------------------------------------------------- > Host: > IP address: > br0: 192.168.1.27 netmask 255.255.255.0 > Routing table: > Destination Gateway Genmask Flags Metric Ref Use > Iface > 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 br0 > 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 > > Guest: > IP address: > eth0: 192.168.1.26 netmask 255.255.255.0 > Routing table: > Destination Gateway Genmask Flags Metric Ref Use > Iface > 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 > 169.254.0.0(link-local) 0.0.0.0 255.255.0.0 U 1000 0 > 0 eth0 > 192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 > -------------------------------------------------------------- > The ping DUP problem is still there. > Then in another machine, the same steps are executed with same host os and > same guest os, except that br0 is created using bridge-utils package, not > ovs-vsctl. When ping from the guest, the DUP problem has gone. So it seems > that the bridge created by ovs-vsctl is different than the bridge created > by bridge-utils package. Is that correct to say this problem is related to > ovs? > > Cheers, > > Hu Jingfei > > 3/19 Ben Pfaff <b...@nicira.com> > > > I don't see how br0 and eth0 having the same MAC address would cause the > > behavior that you mention. I would suggest following a conventional > > troubleshooting procedure instead of making this assumption. > > > > If you want us to help with that troubleshooting then you can start from > > the suggestions in REPORTING-BUGS. > > > > On Mon, Mar 19, 2012 at 10:12:17AM +0800, Jingfei Hu wrote: > > > Thanks, Ben, > > > But there is a problem here. The following commands have not changed: > > > ------------------------------------ > > > sudo ovs-vsctl add-br br0 > > > sudo ovs-vsctl set bridge br0 datapath_type=netdev > > > sudo ovs-vsctl add-port br0 eth0 > > > sudo ovs-vsctl add-port br0 tap0 > > > ------------------------------------ > > > The tap0 interface is created using OpenVPN utility with following > > command: > > > ------------------------------------ > > > sudo openvpn --mktun --dev tap0 > > > ------------------------------------ > > > Then I have created a VM using VirtualBox-4.1 and made the VM use the > > > Bridged Adapter tap0. IP address settings are: > > > ------------------------------------ > > > In my host: > > > sudo ifconfig br0 192.168.1.24 netmask 255.255.255.0 > > > eth0 and tap0 got no ip address assigned > > > In the guest, i.e. VM: > > > sudo ifconfig eth0 192.168.1.26 netmask 255.255.255.0 > > > ------------------------------------ > > > After that, my guest is able to reach the outside network, and the > > machine > > > which resides in the same LAN, says it's ip address is 192.168.1.14, > > could > > > also found my guest. The PROBLEM is: > > > when I ping the 192.168.1.14 from my guest, the ICMP reply is always > > > duplicated. I guess the cause is because the br0 has the same mac address > > > with eth0, but don't know how to solve it. > > > Any ideas will be appreciated. Sorry for the question in question, I > > should > > > ask it in one post. > > > > > > Cheers, > > > Hu Jingfei > > > > > > > > > 2012/3/18 Ben Pfaff <b...@nicira.com> > > > > > > > On Sun, Mar 18, 2012 at 10:46:36PM +0800, Jingfei Hu wrote: > > > > > I have installed OVS userspace program on Ubuntu Oneiric according to > > > > > INSTALL.Linux. Then I have added a bridge using following commands: > > > > > > > > > > sudo ovs-vsctl add-br br0 > > > > > sudo ovs-vsctl set bridge br0 datapath_type=netdev > > > > > sudo ovs-vsctl add-port br0 eth0 > > > > > sudo ovs-vsctl add-port br0 tap0 > > > > > > > > > > Then I setup the bridge br0 as follows: > > > > > sudo ifconfig br0 192.168.1.24 netmask 255.255.255.0 > > > > > After that, I check it with command ifconfig -a, finding that the > > mac br0 > > > > > and eth0 have the same mac. > > > > > > > > > > Is it normal? > > > > > > > > Yes. > > > > > > _______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss
