Hello,
I have created a bridge br0 using ovs-vsctl. Here are the details:
$ sudo ovs-vsctl show
e5d4fbba-e9dc-47e1-be63-9dbb7ddd9120
Bridge "br0"
Controller "tcp:xxx.xxx.7.56:6633"
Port "br0"
Interface "br0"
type: internal
Port "gre1"
Interface "gre1"
type: gre
options: {remote_ip="xxx.xxx.7.80"}
Port "gre2"
Interface "gre2"
type: gre
options: {remote_ip="xxx.xxx.7.59"}
$ifconfig
br0 Link encap:Ethernet HWaddr
inet addr:xxx.xxx.7.150 Bcast:xxx.xxx.7.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
eth0 Link encap:Ethernet HWaddr
inet addr:xxx.xxx.7.37 Bcast:xxx.xxx.7.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
eth2 Link encap:Ethernet HWaddr
inet addr:xxx.xxx.7.38 Bcast:xxx.xxx.7.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
I have set up a NOX controller at tcp:xxx.xxx.7.56:6633 using the command:
$ sudo ./nox_core -i ptcp:xxx.xxx.7.55:6633 pyswitch -v -v
The output of the controller shows that no switches joined it. I assumed
switches are not able to connect to it. I am able to ping xxx.xxx.7.150 (the IP
address of the bridge) from the controller machine. I can't figure out what is
wrong. Any ideas?
Thanks,
Dushyant
_______________________________________________
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
