> 1. Some questions about checksum in OVS (likunyun)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 3 Dec 2011 12:28:32 +0000
> From: likunyun <kunyu...@hotmail.com>
> Subject: [ovs-discuss] Some questions about checksum in OVS
> To: <discuss@openvswitch.org>
> Message-ID: <blu154-w64aaecd4ab3dc5f2318a00d8...@phx.gbl>
> Content-Type: text/plain; charset="gb2312"
>
>
> Hello,
>
> Recently I did the rate test about open vswitch based on xen. When I did the
> test about VM-to-Native,there are some problem.
> VM could ping the Native.
> When VM sends UDP packet to Native(A computer without virtualization), VM
> sends millions packet but Native only get 200 packets.
> When VM sends TCP packet to Native, netperf can't establish the connection .
>
> I enabled netdevice's tx csum in VM, and also enabled the physical
> netdevice's tx csum in dom0.
> When I disable the netdevice's tx csum in VM. It works,Native can get packets
> normally.
>
> When VM sends UDP packets(64byte), I fetched the skb before it was been sent
> into net device driver.
> I found :
> skb->ip_summed =3
> skb->csum_offset = 0
> skb->csum_start = 6
> Normally skb->csum_start should be 0x34 and skb->csum_offset shou be 0x6
>
> I found the fuction set_skb_csum_pointers() in datapath/checksum.c line 253:
> void set_skb_csum_pointers(struct sk_buff *skb, u16 csum_start, u16
> csum_offset)
> {
> OVS_CB(skb)->csum_start = csum_start;
> skb->csum = csum_offset;
> }
> When I changed the function like below, It works,Native can get packets
> normally.:
> void set_skb_csum_pointers(struct sk_buff *skb, u16 csum_start, u16
> csum_offset)
> {
> OVS_CB(skb)->csum_start = csum_start;
> skb->csum_start = csum_start;
> skb->csum_offset = csum_offset;
> }
>
> Are there somebody meet this problem? Is the change reasonable?
> And I am newly about ovs, How does OVS_CB(skb)->csum_start workes in OVS ?
>
> Test Information:
> openvswitch: 1.2.2
> VM:suse11-64
> tool: netperf 2.4.5
> Dom0 Kernel: linux-2.6.36
> net device: intel 82599
> net device driver: ixgbe-3.3.8
>
> Thanks.
I confirmed the condition ,I am so sorry that I had made a mistake.
Dom0 kernel's version is 2.6.32.36 ,not 2.6.36.
proto_data_valid is been defined in struct sk_buff in kernel 2.6.32.36.
_______________________________________________
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
