As a follow-up, I am getting warning like Feb 16 16:03:38|00006|dpif|WARN|system@dp0: failed to put[create][modify][zero] (Invalid argument) in_port(1),eth(src=f0:7b:cb:a1:3c:c6,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip=10.33.0.132,tip=10.33.0.1,op=1), packets:0, bytes:0, used:never Feb 16 16:03:38|00007|dpif|WARN|system@dp0: failed to put[create][modify][zero] (Invalid argument) in_port(1),eth(src=58:b0:35:7c:7b:7a,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0800),ipv4(src=10.33.1.144,dst=255.255.255.255,proto=17,tos=0),udp(src=17500,dst=17500), packets:0, bytes:0, used:never Feb 16 16:03:38|00008|dpif|WARN|system@dp0: failed to put[create][modify][zero] (Invalid argument) in_port(1),eth(src=58:b0:35:7c:7b:7a,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0800),ipv4(src=10.33.1.144,dst=10.33.7.255,proto=17,tos=0),udp(src=17500,dst=17500), packets:0, bytes:0, used:never Feb 16 16:03:38|00009|dpif|WARN|system@dp0: failed to put[create][modify][zero] (Invalid argument) in_port(1),eth(src=f8:1e:df:e1:f2:11,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0800),ipv4(src=10.33.2.160,dst=255.255.255.255,proto=17,tos=0),udp(src=62502,dst=2223), packets:0, bytes:0, used:never Feb 16 16:03:38|00010|dpif|WARN|system@dp0: failed to put[create][modify][zero] (Invalid argument) in_port(1),eth(src=00:1b:77:da:c9:10,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0800),ipv4(src=10.33.2.35,dst=10.33.7.255,proto=17,tos=0),udp(src=137,dst=137), packets:0, bytes:0, used:never Feb 16 16:03:40|00011|dpif|WARN|Dropped 7 log messages in last 2 seconds due to excessive rate Feb 16 16:03:40|00012|dpif|WARN|system@dp0: failed to put[create][modify] (Invalid argument) in_port(1),eth(src=00:1b:77:da:c9:10,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0800),ipv4(src=10.33.2.35,dst=10.33.7.255,proto=17,tos=0),udp(src=137,dst=137) Feb 16 16:03:41|00013|dpif|WARN|system@dp0: failed to put[create][modify] (Invalid argument) in_port(1),eth(src=00:1b:77:da:c9:10,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0800),ipv4(src=10.33.2.35,dst=10.33.7.255,proto=17,tos=0),udp(src=137,dst=137) Feb 16 16:03:41|00014|dpif|WARN|system@dp0: failed to put[create][modify] (Invalid argument) in_port(1),eth(src=00:1b:77:da:c9:10,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0800),ipv4(src=10.33.2.35,dst=10.33.7.255,proto=17,tos=0),udp(src=137,dst=137)
Hope it give someone a clue what is happening. Regards KK On 16 February 2011 16:01, kk yap <yap...@stanford.edu> wrote: > Hi, > > I am running OVS with ovs-openflowd (version 1.1.0pre2). openflowd > seems to be killing itself for some reason which I cannot figure out. > Attached is the verbose output of ovs-openflowd and the pcap of the > OpenFlow traffic going on during that session. The session ended with > ovs-openflowd terminating itself. > > Wonder if anyone can provide a clue on why this is happening. Thanks. > > Regards > KK > _______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss_openvswitch.org
